Publikationer - Produktutveckling, produktion och design

1088 Publikationer

Antologibidrag

Bäckstrand, J., Löfving, M. (2024). Spanning boundaries through intersectoral mobility. In: Nicholas O'Regan (Ed.), From purpose to impact: The university and business partnership (pp. 304-313). Routledge
Almusaed, A., Almssad, A., Rico-Cortez, M. (2023). Critical interpretation of a non-creative supervision practice for Ph.D. students. In: S. El Takach & O. Tayfur Ozturk (Ed.), Studies on social and education sciences 2022 (pp. 26-46). Washington, DC: The International Society for Technology, Education, and Science (ISTES)
Reitsma, E., Hilletofth, P. (2022). Supply chain strategizing in new product development. In: Joseph Sarkis (Ed.), The Palgrave Handbook of Supply Chain Management (pp. 1-23). Cham: Palgrave Macmillan
Elgh, F., Johansson, J. (2020). Traceability in engineer-to-order businesses. In: Systems engineering in research and industrial practice: Foundations, developments and challenges (pp. 115-145). Cham: Springer
Bjursell, C., Raudberget, D. (2019). Organising for knowledge and learning – a balancing act between divergent forces. In: Human resource management: A Nordic perspective (pp. 42-55). London, UK: Routledge
Johansson, J., Elgh, F. (2019). Knowledge objects enable mass-individualization. In: Andrés-Pérez E., González L., Periaux J., Gauger N., Quagliarella D., Giannakoglou K. (Ed.), Computational Methods in Applied Sciences Cham: Springer
Nafisi, M., Wiktorsson, M., Rösiö, C., Granlund, A. (2019). Manufacturing engineering requirements in the early stages of new product development — A case study in two assembly plants. In: M. Ram & J. P. Davim (Ed.), Advanced applications in manufacturing engineering (pp. 141-167). Elsevier
Popovic, D., Rösiö, C. (2019). Product and manufacturing systems alignment: a case study in the timber house building industry. In: Emerald Reach Proceedings Series Emerald Group Publishing Limited
Bjursell, C., Raudberget, D. (2017). Organisering för kunskap och lärande: En balansgång mellan motsättningar. In: Helene Ahl, Ingela Bergmo Prvulovic & Karin Kilhammar (Ed.), HR: Att ta tillvara mänskliga resurser (pp. 59-76). Lund: Studentlitteratur AB
Bäckstrand, J. (2013). Kunddrivet inköp. In: Bonnier Ledarskaphandböcker Stockholm: Bonnier Business Publishing
Danilovic, M., Winroth, M. (2012). Kalmar Industries Supplier Network. In: Steven D. Eppinger and Tyson R. Browning (Ed.), Design Structure Matrix Methods and Applications (pp. 317-324). MIT Press
Wikner, J. (2012). Grad av kundorderstyrning. In: Gösta Hultén (Ed.), Bonnier ledarskapshandböcker: Inköp & Logistik (pp. 5.1 / 1-5.1 / 25). Stockholm: Bonnier Ledarskap
Berglund, M., Guinery, J., Karltun, J. (2011). The Unsung Contribution of Production Planners and Schedulers at Production and Sales Interfaces. In: Jan C. Fransoo, Toni Wäfler, John R. Wilson (Ed.), Behavioral Operations in Planning and Scheduling (pp. 47-81). Heidelberg: Springer Berlin/Heidelberg
Wäfler, T., Von der Weth, R., Karltun, J., Starker, U., Gärtner, K., Gasser, R., Bruch, J. (2011). Human Control Capabilities. In: Jan C. Fransoo, Toni Wäfler, John Wilson (Ed.), Behavioral Operations in Planning and Scheduling Springer
Elgh, F., Sunnersjö, S. (2009). Collaborative Engineering for Enhanced Producibility by Ontology-based Integration of Design and Production. In: Advances in E-Collaboration (AECOB) Book Series Hershey: Information Science Reference
Elgh, F., Sunnersjö, S. (2009). An Ontology Approach to Collaborative Engineering for Producibility. In: E-Collaboration: Concepts, Methodologies, Tools, and Applications (pp. 1000-1019). Hershey/New York: Information Science Reference
Karltun, A. (2008). Att följa hela Posten-projektet på nära håll. In: Forskarroller i interaktivt utvecklingsarbete: Om samverkansprocesser för ergonomiska förbättringar (pp. 111-153). Linköping: Linköping University Electronic Press
Svengren-Holm, L., Anderson, H., Huge-Brodin, M., Johansson, G., Nilsson, F. (2008). Synkronisering mellan delprocesser i innovationsprocessen. In: Annika Olsson (Ed.), Innovationsförmåga Stockholm: Product innovation engineering program (PIEp)
Bellgran, M., Säfsten, K. (2006). Produktionsutveckling. In: Håkan Ylinenpää, Bo Johansson, Jan Johansson (Ed.), Ledning i småföretag (pp. 161-197). Lund: Studentlitteratur
Berger, A., Wikner, J. (2006). Affärssystem och Lean produktion: det bästa av två världar. In: John Bicheno (Ed.), Ny verktygslåda för Lean: för snabbt och flexibelt flöde (pp. 118-119). Göteborg: Revere AB
Karltun, A. (2006). Arbetsintensifiering: bikonsekvenser av en ”working smarter” strategi inom Postens brevbärarverksamhet.. In: Tid för utveckling? Lund: Studentlitteratur
Hansbo, P. (2005). Three lectures on error estimation and adaptivity. In: Erwin Stein (Ed.), Courses and lectures / International Centre for Mechanical Sciences Wien: Springer
Säfsten, K. (2000). Evaluation of Assembly Systems in the Context of Change. In: Performance Measurement: Past, Present and Future Cranfield, England: Centre for Business Performance, Cranfield School of Management
Olhager, J., Wikner, J. (1998). A framework for integrated material and capacity based master scheduling. In: Andreas Drexl, Alf Kimms (Ed.), Beyond Manufacturing Resource Planning (MRP II): advanced models and methods for production planning (pp. 3-20). Berlin: Springer-Verlag New York
Eriksson, K., Estep, D., Hansbo, P., Johnson, C. (1995). Introduction to computational methods for differential equations. In: M. Ainsworth, J. Levesley, W. A. Light, and M. Marletta (Ed.), Theory and numerics of ordinary and partial differential equations (pp. 77-122). Oxford: Oxford University Press
Nilsson, C., Dernroth, J. (1991). Scania och Iveco. In: "Bäst i världen": vad kan vi lära av världens ledande företag? Stockholm: Allmänna Förlaget

Artikel (icke refereegranskat)

Säfsten, K., Johansson, G. (2020). Special Issue: Collaborative Research Approaches in Operations Management: Guest editorial. Journal of Manufacturing Technology Management 31(8), 1509-1515
Trappey, A., Elgh, F., Hartmann, T., James, A., Stjepandic, J., Trappey, C., Wognum, N. (2017). Advanced design, analysis, and implementation of pervasive and smart collaborative systems enabled with knowledge modelling and big data analytics. Advanced Engineering Informatics (pp. 206-207).
Hilletofth, P., Eriksson, D., Sollander, K. (2016). Guldfiskbeslut av Ericsson att flytta ut produktionen. Intelligent logistik : inköp, logistik, produktion, affärer (pp. 8-9).
Hilletofth, P., Hilmola, O., Wang, Y. (2016). Simulation based decision support systems in the supply chain context. Industrial management & data systems 116(2),
Hilletofth, P., Rampa, V., Wen, Y., Wang, C., Chen, C. (2016). Editorial. International Journal of Ad Hoc and Ubiquitous Computing 21(4), 221-223
Hilletofth, P., Hilmola, O., Lorentz, H. (2013). Editorial. World Review of Intermodal Transportation Research (WRITR) 4(2/3), 97-98
Johansson, G., Säfsten, K. (2013). Towards management of challenges in the innovation process: a case study on the application of the interface assessment tool. Product 11(1), 15-23
Hilletofth, P., Hedenstierna, C. (2012). Editorial. International Journal of Services Sciences 4(3/4), 211-212
Hilletofth, P., Hilmola, O. (2012). Editorial. International Journal of Manufacturing Research 7(2), 99-100
Wikner, J. (2012). Kundorderstyrning och frikopplingszoner. Bättre produktivitet (pp. 10-18).
Almström, P., Andersson, C., Muhammad, A., Winroth, M. (2010). Hållbar produktion kan skapas genom ökad utnyttjandegrad. Verkstäderna
Wikner, J., Bäckstrand, J. (2010). Strategiska frikopplingspunkter och samverkan i försörjningskedjor. Bättre Produktivitet 8(8), 12-16
Bäckstrand, J., Wikner, J. (2009). Samordning av grad av samverkan och grad av kundorderstyrning. Bättre produktivitet (pp. 12-16).
Johansson, E. (2006). Överföring och användning av information för utformning av logistiksystem. PLAN-nytt
Wikner, J. (2006). Affärssystem och lean production: det bästa av två världar. Intelligent logistik
Hansbo, P. (2005). Nitsche's method for interface problems in computational mechanics. GAMM-Mitteilungen 28(2), 183-206
Johansson, E. (2005). Utveckling av logistiksystem i produktutvecklingsprojekt. Transport och hantering
Olhager, J., Wikner, J. (2000). Perspektiv på modeller och metoder för produktionslogistik. Bättre produktivitet (pp. 12-15).
Amouzgar, K., Strömberg, N. (null). Radial basis functions with a priori bias in comparisonwith a posteriori bias under multiple modeling criteria. Structural and multidisciplinary optimization (Print)

Artikel (refereegranskat)

Kans, M., Löfving, M. (2024). Unlocking the circular potential: A review and research agenda for remanufacturing in the European wood products industry. Elsevier
Linnéusson, G., Boldt, S. (2024). Towards Assessing the Economic Sustainability of Reconfigurable Modularization in Semi-Automatic Assembly Systems: A System Dynamics Perspective. Systems 12(6),
Melander, A., Brunninge, O., Andersson, D., Elgh, F., Löfving, M. (2024). Management innovation in SMEs – taking psychological ownership of Hoshin Kanri. Production planning & control (Print) 35(14), 1687-1705
Mihocic, E., Gharehbaghi, K., Hilletofth, P., Tee, K., Myers, M. (2024). Augmenting the cities’ and metropolitan regional demands for mega rail infrastructure: the application of SWOT and factor analysis. Smart and Sustainable Built Environment
Pandit, S., Agarwalla, P., Song, F., Jansson, A., Dotti, G., Brudno, Y. (2024). Implantable CAR T cell factories enhance solid tumor treatment. Biomaterials
Ramstrand, N., Riveiro, M., Eriksson, L., Ceder, M. (2024). Designing feelings into lower-limb prostheses: A kansei engineering approach to understand lower-limb prosthetic cosmeses. Rehabilitation and Assistive Technologies Engineering
Shah, M., Borade, H., Dave, V., Agrawal, H., Nair, P., Vakharia, V. (2024). Utilizing TGAN and ConSinGAN for Improved Tool Wear Prediction: A Comparative Study with ED-LSTM, GRU, and CNN Models. Electronics 13(17),
Andersen, A., Rösiö, C. (2023). Continuing Engineering Education in Changeable and Reconfigurable Manufacturing: Implications of Problem-Based Learning in Industrial Practice. International Journal of Engineering Education 39(5), 1118-1130
Arjomandi Rad, M., Cenanovic, M., Salomonsson, K. (2023). Image regression-based digital qualification for simulation-driven design processes, case study on curtain airbag. Journal of engineering design (Print) 34(1), 1-22
Fobbe, L., Hilletofth, P. (2023). Moving toward a circular economy in manufacturing organizations: the role of circular stakeholder engagement practices. The International Journal of Logistics Management 34(3), 674-698
Johansen, K. (2023). A disruptive industrial environment – Aspects to reflect on as a manufacturing SME. Journal of Applied Economics and Business Research 13(2), 57-66
Jonsson, C., Stolt, R., Elgh, F. (2023). A case-based reasoning method including tooling function for case retrieval and reuse in stamping tooling design. Computer-Aided Design and Applications 20(5), 839-855
Lennartsson, M., André, S., Elgh, F. (2023). PLM support for design platforms in industrialized house-building. Construction Innovation 23(2), 265-286
Linnéusson, G., Uriarte, A. (2023). Learning from simulating with system dynamics in healthcare: evaluating closer care strategies for elderly patients. Journal of Simulation 17(5), 557-579
Rebeggiani, S., Bergman, M., Rosén, B., Eriksson, L. (2023). On communicating extruded aluminium surface quality along the supply chain – a customer approach to sustainable surfaces. Surface Topography: Metrology and Properties 11(1),
Reitsma, E., Hilletofth, P., Johansson, E. (2023). Supply chain design during product development: a systematic literature review. Taylor & Francis
Sequeira, M., Adlemo, A., Hilletofth, P. (2023). A hybrid fuzzy-AHP-TOPSIS model for evaluation of manufacturing relocation decisions. Operations Management Research (pp. 164-191).
Skärin, F., Rösiö, C., Andersen, A. (2023). Sustainability and circularity in reconfigurable manufacturing: literature review and future research directions. InderScience Publishers
Sordan, J., Oprime, P., Pimenta, M., Chiabert, P., Lombardi, F., Hilletofth, P. (2023). One-of-a-kind production (OKP) planning and control: a comprehensive review and future research directions. International Journal of Productivity and Performance Management 72(8), 2446-2466
Säfsten, K., Harlin, U., Johansen, K., Larsson, L., Rönnbäck, A. (2023). Resilient and sustainable production systems: towards a research agenda. International Journal of Manufacturing Research 18(4), 343-365
Vestin, A., Säfsten, K., Popovic, D. (2023). Mitigating product data management challenges in the wooden single-family house industry. Journal of Information Technology in Construction (pp. 757-773).
Alayón, C., Säfsten, K., Johansson, G. (2022). Barriers and Enablers for the Adoption of Sustainable Manufacturing by Manufacturing SMEs. Sustainability 14(4),
Andersson, T., Linnéusson, G., Holmén, M., Kjellsdotter, A. (2022). Nurturing innovative culture in a healthcare organisation: Lessons from a Swedish case study. Journal of Health Organization & Management 37(9), 17-33
Arjomandi Rad, M., Salomonsson, K., Cenanovic, M., Balague, H., Raudberget, D., Stolt, R. (2022). Correlation-based feature extraction from computer-aided design, case study on curtain airbags design. Computers in industry (Print)
Ascic, I., Ascic, J., Hilletofth, P., Pimenta, M., Hilmola, O. (2022). An Evaluation of Critical Capabilities and Improvement Areas for Competitive Manufacturing in a Developed-Country Environment. Sustainability 14(11),
Elias, M., Liboni, L., Cezarino, L., Martins, F., Pimenta, M., Hilletofth, P., Hilmola, O. (2022). Shedding Light on the Brazilian Amazon Biotrade: A Study on Sustainable Development in Native Communities. Sustainability 14(19),
Gharehbaghi, K., Hosseinian-Far, A., Hilletofth, P. (2022). The predicaments of environmental impact assessment (EIA) for transport infrastructure: an examination of policy stagnation and progress. Transforming Government 16(4), 449-463
Johansen, K., Grahn, S. (2022). Usefulness of digital tools when designing human robot collaboration layouts. Product 20(2),
Kaneberg, E., Rico-Cortez, M., Hertz, S., Jensen, L., Sandoval-Pineda, J., Gonzalez-Huerta, R. (2022). Hydrogen technology for supply chain sustainability: The Mexican transportation impacts on society. International journal of hydrogen energy 47(70), 29999-30011
Kantari, L., Pujawan, I., Arvitrida, N., Hilletofth, P. (2022). Mixing contract-based and on-demand sourcing of transportation services for improved supply chain performance under supply uncertainties. International journal of systems science 9(4), 472-488
Linnéusson, G., Andersson, T., Kjellsdotter, A., Holmén, M. (2022). Using systems thinking to increase understanding of the innovation system of healthcare organisations. Journal of Health Organization & Management 36(9), 179-195
Melander, A., Müllern, T., Anderssson, D., Elgh, F., Löfving, M. (2022). Bridging the Knowledge Gap in Collaborative Research—in Dialogues We Trust. Systemic Practice and Action Research (pp. 655-677).
Popovic, D., Schauerte, T., Elgh, F. (2022). Product platform alignment in industrialised house building. Wood Material Science & Engineering 17(6), 572-585
Rahnama, H., Johansen, K., Larsson, L., Ronnback, A. (2022). Collaboration in Value Constellations for Sustainable Production: The Perspective of Small Technology Solution Providers. Sustainability 14(8),
Renkema, M., Hilletofth, P. (2022). Intermediate short food supply chains: a systematic review. British Food Journal 124(13), 541-558
Salim, R., Johansen, K., Manduchi, A., Säfsten, K. (2022). Automation Decisions in Manufacturing System Development Projects: The Wood Products Industry Perspective. BioProducts Business 7(1), 1-12
Skärin, F., Rösiö, C., Andersen, A. (2022). An Explorative Study of Circularity Practices in Swedish Manufacturing Companies. Sustainability 14(12),
Thajudeen, S., Elgh, F., Lennartsson, M. (2022). Supporting the Reuse of Design Assets in ETO-Based Components: A Case Study from an Industrialised Post and Beam Building System. Buildings 12(1),
Thajudeen, S., Lennartsson, M., Elgh, F. (2022). Identification of challenges and success factors in industrialised house building design. Proceedings of the Institution of Civil Engineers 175(1), 27-37
Özel, S., Akay, S., Özel, F. (2022). A facile synthesis of Ag2MnSnS4 nanorods through colloidal method. Turkish journal of chemistry 46(4), 1291-1296
Dogea, R., Stolt, R. (2021). Identifying challenges related to industry 4.0 in five manufacturing companies. Procedia Manufacturing (pp. 328-334).
Edh Mirzaei, N., Hilletofth, P., Pal, R. (2021). Challenges to competitive manufacturing in high-cost environments: checklist and insights from Swedish manufacturing firms. Operations Management Research (pp. 272-292).
Ekström, T., Hilletofth, P., Skoglund, P. (2021). Towards a purchasing portfolio model for defence procurement: A Delphi study of Swedish defence authorities. International Journal of Production Economics
Eriksson, D., Hilletofth, P., Tate, W., Gothager, M. (2021). Critical Manufacturing Prerequisites for Successful Reshoring. Operations and Supply Chain Management 14(2), 249-260
Eriksson, M., Ferwerda, B. (2021). Towards a User Experience Framework for Business Intelligence. Journal of Computer Information Systems 61(5), 428-437
Fobbe, L., Hilletofth, P. (2021). The role of stakeholder interaction in sustainable business models. A systematic literature review. Journal of Cleaner Production
Fobbe, L., Hilletofth, P. (2021). Stakeholder interaction for sustainability in seaports: Analysing the implementation and its linkages to overarching interaction efforts. European Business Review 33(5), 693-724
Henriksson, F., Johansen, K., Schütte, S. (2021). Challenges when working with renewable materials: knocking on wood?. International Journal of Sustainable Engineering 14(6), 1980-1987
Hilletofth, P., Sequeira, M., Tate, W. (2021). Fuzzy-logic-based support tools for initial screening of manufacturing reshoring decisions. Industrial management & data systems 121(5), 965-992
Jarfors, A., Matsushita, T., Siafakas, D., Stolt, R. (2021). On the nature of the anisotropy of Maraging steel (1.2709) in additive manufacturing through powder bed laser-based fusion processing. Materials & design
Jarfors, A., Sevastopol, R., Seshendra, K., Zhang, Q., Steggo, J., Stolt, R. (2021). On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting. Technologies 9(2),
Jarfors, A., Shashidhar, A., Yepur, H., Steggo, J., Andersson, N., Stolt, R. (2021). Build strategy and impact strength of slm produced maraging steel (1.2709). Metals 11(1), 1-20
Johansen, K., Ashour Pour, M., Rao, S. (2021). Positioning sustainable automation in production of customized products. Procedia Manufacturing (pp. 358-364).
Kantari, L., Pujawan, I., Arvitrida, N., Hilletofth, P. (2021). Investigating the mix of contract-based and on-demand sourcing for transportation services under fluctuate and seasonal demand. International Journal of Logistics 24(3), 280-302
Löfving, M., Melander, A., Elgh, F., Andersson, D. (2021). Implementing Hoshin Kanri in small manufacturing companies. Journal of Manufacturing Technology Management 32(9), 304-322
Murillo Oviedo, A., Pimenta, M., Piato, É., Hilletofth, P. (2021). Development of market-oriented strategies through cross-functional integration in the context of the food and beverage industry. Business Process Management Journal 27(3), 901-921
Popovic, D., Elgh, F., Heikkinen, T. (2021). Configuration of flexible volumetric elements using product platforms: Information modeling method and a case study. Automation in Construction
Rivalta, F., Ceschini, L., Jarfors, A., Stolt, R. (2021). Effect of scanning strategy in the l‐pbf process of 18ni300 maraging steel. Metals 11(5),
Sequeira, M., Hilletofth, P., Adlemo, A. (2021). AHP-based support tools for initial screening of manufacturing reshoring decisions. Journal of Global Operations and Strategic Sourcing 14(3), 502-527
Shahbazi, S., Johansen, K., Sundin, E. (2021). Product design for automated remanufacturing—a case study of electric and electronic equipment in Sweden. Sustainability 13(16),
Vestin, A., Säfsten, K., Löfving, M. (2021). Smart factories for single-family wooden houses: a practitioner’s perspective. Construction Innovation 21(1), 64-84
Berglund, M., Harlin, U., Säfsten, K. (2020). Interactive research in production start-up—application and outcomes. Journal of Manufacturing Technology Management 31(8), 1561-1581
Bergman, M., Rosen, B., Eriksson, L., Lundeholm, L. (2020). Material & Surface design methodology-the user study framework. Surface Topography-Metrology and Properties 8(4),
Bruch, J., Rösiö, C., Granlund, A., Johansson, P. (2020). Managing the core plant role-key prerequisites from an operations perspective. International Journal of Manufacturing Research 15(1), 90-106
Cenanovic, M., Hansbo, P., Larson, M. (2020). Finite element procedures for computing normals and mean curvature on triangulated surfaces and their use for mesh refinement. Computer Methods in Applied Mechanics and Engineering
Ekström, T., Hilletofth, P., Skoglund, P. (2020). Differentiation strategies for defence supply chain design. Journal of Defense Analytics and Logistics 4(2), 183-202
Heikkinen, T., Johansson, J., Elgh, F. (2020). Multidisciplinary design automation – A conceptual framework for working with product model extensions. International Journal of Agile Systems and Management 13(1), 28-47
Heikkinen, T., Stolt, R., Elgh, F. (2020). Incorporating Design for Additive Manufacturing in Multidisciplinary Design Automation – Challenges Identified. Computer-Aided Design and Applications 17(5), 936-947
Hilmola, O., Lähdeaho, O., Henttu, V., Hilletofth, P. (2020). Covid-19 pandemic: Early implications for north european manufacturing and logistics. Sustainability 12(20), 1-13
Johansen, K. (2020). Challenges for manufacturers when customers are locked down - Is it possible to be prepared?. Journal of Applied Economics and Business Research 10(2), 54-58
Pardillo-Baez, Y., Sequeira, M., Hilletofth, P. (2020). Local and Organic Food Distribution Systems: Towards a Future Agenda. Operations and Supply Chain Management 13(4), 336-348
Reitsma, E., Manfredsson, P., Hilletofth, P., Andersson, R. (2020). The outcomes of providing lean training to strategic suppliers: A Swedish case study. The TQM Journal 33(5), 1049-1065
Salim, R., Manduchi, A., Johansson, A. (2020). Investment Decisions on Automation of Manufacturing in the Wood Products Industry: A Case Study. Bioproducts Business 5(1), 1-12
Sansone, C., Hilletofth, P., Eriksson, D. (2020). Evaluation of critical operations capabilities for competitive manufacturing in a high-cost environment. Journal of Global Operations and Strategic Sourcing 13(3), 229-250
Stolt, R., Elgh, F. (2020). Introducing design for selective laser melting in aerospace industry. Journal of Computational Design and Engineering 7(4), 489-497
Tezel, A., Papadonikolaki, E., Yitmen, I., Hilletofth, P. (2020). Preparing construction supply chains for blockchain technology: An investigation of its potential and future directions. Frontiers of Engineering Management (pp. 547-563).
Das, S., Cenanovic, M., Zhang, J. (2019). A physics-based estimation of mean curvature normal vector for triangulated surfaces. Proceedings of the International Geometry Center 12(1), 70-78
De Goey, H., Hilletofth, P., Eriksson, L. (2019). Design-driven innovation: a systematic literature review. Emerald Group Publishing Limited
Ferreira, A., Pimenta, M., Wlazlak, P. (2019). Antecedents of cross-functional integration level and their organizational impact. Journal of business & industrial marketing 34(8), 1706-1723
Granlund, A., Rösiö, C., Bruch, J., Johansson, P. (2019). Lead factory operationalisation and challenges. Production planning & control (Print) 30(2-3), 96-111
Müller, J., Isaksson, O., Landahl, J., Raja, V., Panarotto, M., Levandowski, C., Raudberget, D. (2019). Enhanced function-means modeling supporting design space exploration. Artificial intelligence for engineering design, analysis and manufacturing 33(4), 502-516
Raudberget, D., Elgh, F., Stolt, R., Johansson, J., Lennartsson, M. (2019). Developing agile platform assets: exploring ways to reach beyond modularisation at five product development companies. International Journal of Agile Systems and Management 12(4), 311-331
Stolt, R., Elgh, F. (2019). Enhancing traceability in heterogeneous design platforms. International Journal of Product Lifecycle Management 12(1), 62-80
Wlazlak, P., Eriksson, Y., Johansson, G., Ahlin, P. (2019). Visual representations for communication in geographically distributed new product development projects. Journal of engineering design (Print) 30(8-9), 385-403
Wlazlak, P., Säfsten, K., Hilletofth, P. (2019). Original equipment manufacturer (OEM)-supplier integration to prepare for production ramp-up. Journal of Manufacturing Technology Management 30(2), 506-530
Wognum, N., Bil, C., Elgh, F., Peruzzini, M., Stjepandić, J., Verhagen, W. (2019). Transdisciplinary systems engineering: Implications, challenges and research agenda. International Journal of Agile Systems and Management 12(1), 58-89
André, S., Elgh, F. (2018). Modeling of transdisciplinary engineering assets using the design platform approach for improved customization ability. Advanced Engineering Informatics (pp. 277-290).
Heikkinen, T., Johansson, J., Elgh, F. (2018). Review of CAD-model Capabilities and Restrictions for Multidisciplinary use. Computer-Aided Design and Applications 15(4), 509-519
Hjertberg, T., Stolt, R., Elgh, F. (2018). A tool for obtaining transparency and traceability in heterogeneous design automation environments. Computer-Aided Design and Applications 15(4), 488-500
Jansson, J., Gustafsson, T., Salomonsson, K., Olofsson, J., Johansson, J., Appelsved, P., Palm, M. (2018). An anisotropic non-linear material model for glass fibre reinforced plastics. Composite structures (pp. 93-98).
Johansson, J., Contero, M., Company, P., Elgh, F. (2018). Supporting connectivism in knowledge based engineering with graph theory, filtering techniques and model quality assurance. Advanced Engineering Informatics (pp. 252-263).
Olofsson, J., Cenni, R., Cova, M., Bertuzzi, G., Salomonsson, K., Johansson, J. (2018). Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour. Structural and multidisciplinary optimization (Print) 57(5), 1889-1903
Pahlberg, T., Thurley, M., Popovic, D., Hagman, O. (2018). Crack detection in oak flooring lamellae using ultrasound-excited thermography. Infrared physics & technology (pp. 57-69).
Wlazlak, P., Säfsten, K., Hilletofth, P., Johansson, G. (2018). Integration of Suppliers’ Workflows in the OEMs’ New Product Development Process. Procedia Manufacturing (pp. 479-486).
Amouzgar, K., Strömberg, N. (2017). Radial basis functions as surrogate models with a priori bias in comparison with a posteriori bias. Structural and multidisciplinary optimization (Print) 55(4), 1453-1469
André, S., Elgh, F., Johansson, J., Stolt, R. (2017). The design platform – a coherent platform description of heterogeneous design assets for suppliers of highly customised systems. Journal of engineering design (Print) 28(10-12), 599-626
Burman, E., Elfverson, D., Hansbo, P., Larson, M., Larsson, K. (2017). A cut finite element method for the Bernoulli free boundary value problem. Computer Methods in Applied Mechanics and Engineering (pp. 598-618).
Burman, E., Hansbo, P., Larson, M. (2017). The penalty-free Nitsche Method and nonconforming finite elements for the Signorini problem. SIAM Journal on Numerical Analysis 55(6), 2523-2539
Burman, E., Hansbo, P., Larson, M., Massing, A. (2017). A cut discontinuous Galerkin method for the Laplace–Beltrami operator. IMA Journal of Numerical Analysis 37(1), 138-169
Burman, E., Hansbo, P., Larson, M., Stenberg, R. (2017). Galerkin least squares finite element method for the obstacle problem. Computer Methods in Applied Mechanics and Engineering (pp. 362-374).
De Goey, H., Hilletofth, P., Eriksson, L. (2017). Design-driven innovation: Making meaning for whom?. The Design Journal 20(Suppl. 1), S479-S491
Hansbo, P., Jonsson, T., Larson, M., Larsson, K. (2017). A Nitsche method for elliptic problems on composite surfaces. Computer Methods in Applied Mechanics and Engineering (pp. 505-525).
Hansbo, P., Larson, M. (2017). A stabilized finite element method for the Darcy problem on surfaces. IMA Journal of Numerical Analysis 37(3), 1274-1299
Hansbo, P., Larson, M. (2017). Continuous/discontinuous finite element modelling of Kirchhoff plate structures in R3 using tangential differential calculus. Computational Mechanics 60(4), 693-702
Hansbo, P., Larson, M., Massing, A. (2017). A stabilized cut finite element method for the Darcy problem on surfaces. Computer Methods in Applied Mechanics and Engineering (pp. 298-318).
Johannesson, H., Landahl, J., Levandowski, C., Raudberget, D. (2017). Development of product platforms: Theory and methodology. Concurrent Engineering - Research and Applications 25(3), 195-211
Johansson, J. (2017). Exploring design content in cad-models and knowledge bases using graph theory and filtering. 41(4), 5-15
Kasvayee, K., Ghassemali, E., Salomonsson, K., Sujakhu, S., Castagne, S., Jarfors, A. (2017). Strain localization and crack formation effects on stress-strain response of ductile iron. Materials Science & Engineering (pp. 265-271).
Klarbring, A., Torstenfelt, B., Hansbo, P., Larson, M. (2017). Optimal design of fibre reinforced membrane structures. Structural and multidisciplinary optimization (Print) 56(4), 781-789
Olofsson, J., Salomonsson, K., Johansson, J., Amouzgar, K. (2017). A methodology for microstructure-based structural optimization of cast and injection moulded parts using knowledge-based design automation. Advances in Engineering Software (pp. 44-52).
Pabolu, V., Stolt, R., Johansson, J. (2017). Flexible manufacturability analysis applied to the welding process to increase sustainability in engineer to order businesses. International Journal of Agile Systems and Management 10(3/4), 271-294
Stolt, R., André, S., Elgh, F., Andersson, P. (2017). Introducing Welding Manufacturability in a Multidisciplinary Platform for the Evaluation of Conceptual Aircraft Engine components. International Journal of Product Lifecycle Management 10(2), 107-123
Stolt, R., Elgh, F., Andersson, P. (2017). Design for Inspection: Evaluating the Inspectability of Aerospace Components in the Early Stages of Design. Procedia Manufacturing (pp. 1193-1199).
Bertan, F., Ferreira, A., Pimenta, M., Hilletofth, P. (2016). Análise da Integração Interfuncional nos Pontos de Contato de Processos de Desenvolvimento de Sementes. Organizações Rurais & Agroindustriais 18(3),
Burman, E., Hansbo, P., Larson, M., Massing, A., Zahedi, S. (2016). Full gradient stabilized cut finite element methods for surface partial differential equations. Computer Methods in Applied Mechanics and Engineering (pp. 278-296).
Burman, E., Hansbo, P., Larson, M., Zahedi, S. (2016). Cut finite element methods for coupled bulk–surface problems. Numerische Mathematik 133(2), 203-231
Burnett, S., Mendel, P., Nunes, F., Wiig, S., van den Bovenkamp, H., Karltun, A. ... Fulop, N. (2016). Using institutional theory to analyse hospital responses to external demands for finance and quality in five European countries. Journal of Health Services Research and Policy 21(2), 109-117
Cenanovic, M., Hansbo, P., Larsson, M. (2016). Cut finite element modeling of linear membranes. Computer Methods in Applied Mechanics and Engineering (pp. 98-111).
De Oliveira, E., Pimenta, M., Hilletofth, P., Eriksson, D. (2016). Integration through cross-functional teams in a service company. European Business Review 28(4), 405-430
Edh Mirzaei, N., Fredriksson, A., Winroth, M. (2016). Strategic consensus on manufacturing strategy content: Including the operators’ perceptions. International Journal of Operations & Production Management 36(4), 429-466
Engström, A. (2016). Arbetsmöten: Arenor för samspel och lärande. Pedagogisk forskning i Sverige 21(3-4), 283-305
Eriksson, D., Manfredsson, P., Hilletofth, P. (2016). Using the industry as a model for better learning experience in higher education. International Journal of Management in Education (IJMIE) 10(4), 325-338
Hansbo, P., Larson, M., Zahedi, S. (2016). A cut finite element method for coupled bulk-surface problems on time-dependent domains. Computer Methods in Applied Mechanics and Engineering (pp. 96-116).
Hansbo, P., Larsson, F. (2016). The nonconforming linear strain tetrahedron for a large deformation elasticity problem. Computational Mechanics 58(6), 929-935
Hansbo, P., Rashid, A., Salomonsson, K. (2016). Least-squares stabilized augmented Lagrangian multiplier method for elastic contact. Finite elements in analysis and design (Print) (pp. 32-37).
Huang, D., Lee, T., Hilletofth, P., Kao, C. (2016). Creation of a step-by-step process in the pre-startup of a micro business. International Journal of Management and Enterprise Development 15(1), 43-60
Karltun, J., Vogel, K., Bergstrand, M., Eklund, J. (2016). Maintaining knife sharpness in industrial meat cutting: A matter of knife or meat cutter ability. Applied Ergonomics (pp. 92-100).
Kasvayee, K., Salomonsson, K., Ghassemali, E., Jarfors, A. (2016). Microstructural strain distribution in ductile iron: Comparison between finite element simulation and digital image correlation measurements. Materials Science & Engineering (pp. 27-35).
Lantz, B., Andersson, R., Manfredsson, P. (2016). Preliminary tests of normality when comparing three independent samples. Journal of Modern Applied Statistical Methods 15(2), 135-148
Löfving, M. (2016). Homogeneity of manufacturing choices in subcontractor SMEs. Journal of Manufacturing Technology Management 27(2), 261-286
Löfving, M., Säfsten, K., Winroth, M. (2016). Manufacturing strategy formulation, leadership style and organisational culture in small and medium-sized enterprises. International Journal of Manufacturing Technology and Management (IJMTM) 30(5), 306-325
Melander, A., Löfving, M., Andersson, D., Elgh, F., Thulin, M. (2016). Introducing the Hoshin Kanri strategic management system in manufacturing SMEs. Management Decision 54(10), 2507-2523
Panova, Y., Hilletofth, P. (2016). Infrastructure project portfolios for sourcing nearshoring of manufacturing to Russia. Russian Journal of Logistics and Transport Management 3(1), 52-63
Panova, Y., Hilletofth, P. (2016). Роль интермодальных перевозок в национальной экономике: [The role of intermodal traffic in the national economy]. 18(11), 28-36
Persson, M., Eklind, J., Winroth, M. (2016). Coordinating external manufacturing of product modules. Decision Sciences 47(6), 1178-1202
Poorkiany, M., Johansson, J., Elgh, F. (2016). Capturing, structuring and accessing design rationale in integrated product design and manufacturing processes. Advanced Engineering Informatics 30(3), 522-536
Rosen, B., Eriksson, L., Bergman, M. (2016). Kansei, surfaces and perception engineering. Surface Topography: Metrology and Properties 4(3),
Soosay, C., Nunes, B., Bennett, D., Sohal, A., Jabar, J., Winroth, M. (2016). Strategies for sustaining manufacturing competitiveness: Comparative case studies in Australia and Sweden. Journal of Manufacturing Technology Management 27(1), 6-37
Winroth, M., Almström, P., Andersson, C. (2016). Sustainable production indicators at factory level. Journal of Manufacturing Technology Management 27(6), 842-873
Yedeg, E., Wadbro, E., Hansbo, P., Larson, M., Berggren, M. (2016). A Nitsche-type method for Helmholtz equation with an embedded acoustically permeable interface. Computer Methods in Applied Mechanics and Engineering (pp. 479-500).
Andersson, R., Hilletofth, P., Hilmola, O. (2015). Lean implementation in the geriatric care sector in Sweden. International Journal of Six Sigma and Competitive Advantage (IJSSCA) 9(1), 56-71
Andersson, R., Manfredsson, P., Lantz, B. (2015). Total productive maintenance in support processes: an enabler for operation excellence. Total Quality Management and Business Excellence 26(9-10), 1042-1055
Burman, E., Hansbo, P., Larson, M. (2015). A stabilized cut finite element method for partial differential equations on surfaces: The Laplace–Beltrami operator. Computer Methods in Applied Mechanics and Engineering (pp. 188-207).
Cenanovic, M., Hansbo, P., Larson, M. (2015). Minimal surface computation using a finite element method on an embedded surface. International Journal for Numerical Methods in Engineering 104(7), 502-512
Ellonen, H., Wikström, P., Johansson, A. (2015). The role of the website in a magazine business – revisiting old truths. Journal of Media Business Studies 12(4), 238-249
Hansbo, P., Burman, E., Claus, S., Larson, M., Massing, A. (2015). CutFEM: Discretizing geometry and partial differential equations. International Journal for Numerical Methods in Engineering 104(7), 472-501
Hansbo, P., Larson, M. (2015). A posteriori error estimates for continuous/discontinuous Galerkin approximations of the Kirchhoff–Love buckling problem. Computational Mechanics 56(5), 815-827
Hansbo, P., Larson, M., Larsson, F. (2015). Tangential differential calculus and the finite element modeling of a large deformation elastic membrane problem. Computational Mechanics 56(1), 87-95
Hansbo, P., Larson, M., Zahedi, S. (2015). Characteristic cut finite element methods for convection–diffusion problems on time dependent surfaces. Computer Methods in Applied Mechanics and Engineering (pp. 431-461).
Hansbo, P., Larson, M., Zahedi, S. (2015). Stabilized finite element approximation of the mean curvature vector on closed surfaces. SIAM Journal on Numerical Analysis 53(4), 1806-1832
Hansbo, P., Salomonsson, K. (2015). A discontinuous Galerkin method for cohesive zone modelling. Finite elements in analysis and design (Print) (pp. 1-6).
Hilmola, O., Lorentz, H., Hilletofth, P., Malmsten, J. (2015). Manufacturing strategy in SMEs and its performance implications. Industrial management & data systems 115(6), 1004-1021
Hong, M., Lee, T., Kao, C., Hilletofth, P. (2015). Setting organizational key performance indicators in the precision machine industry. International Journal of Management, Knowledge, and Learning 4(2), 135-161
Hägg, G., Vogel, K., Karltun, J., McGorry, R. (2015). How do different temperatures affect knife force?. The Ergonomics Open Journal (pp. 27-31).
Johansson, G., Säfsten, K. (2015). Managing uncertainty, complexity and dispersion in product development projects. International Journal of Product Development 20(1), 25-48
Lee, T., Kuo, Y., Hilletofth, P. (2015). Formulation of marketing information and communication strategies in Taiwan tourism industry. International Journal of Innovation and Learning 18(2), 250-265
Raudberget, D., Levandowski, C., Isaksson, O., Kipouros, T., Johannesson, H., Clarkson, J. (2015). Modelling and Assessing Platform Architectures in Pre-embodiment Phases through Set-based Evaluation and Change Propagation. Journal of Aerospace Operations 3(3-4), 203-221
Stolt, R., André, S., Elgh, F., Johansson, J., Poorkiany, M. (2015). Managing Risk in the Introduction of New Technology in Products. Journal of Aerospace Operations 3(3-4), 167-184
Tsai, C., Lee, T., Yen, S., Hilletofth, P. (2015). Operational process stages of brand alliances: A case study from the reinforcing bar and the construction industries. European Business Review 27(4), 389-408
Vogel, K., Karltun, J., Yeow, P., Eklund, J. (2015). Increased work pace is unprofitable: A beef-cutting case study. Meat Science (pp. 81-88).
Wikner, J., Johansson, E. (2015). Inventory classification based on decoupling points. Production & Manufacturing Research 3(1), 218-235
Andersson, R., Hilletofth, P., Manfredsson, P., Hilmola, O. (2014). Lean Six Sigma strategy in telecom manufacturing. Industrial management & data systems 114(6), 904-921
Burman, E., Hansbo, P. (2014). Fictitious domain methods using cut elements: III. A stabilized Nitsche method for Stokes’ problem. Mathematical Modelling and Numerical Analysis 48(3), 859-874
Danilovic, M., Winroth, M. (2014). Managing Dynamics in Corporate Networks. World Journal of Engineering and Technology 2(1), 32-40
Elgh, F. (2014). Automated engineer-to-order systems – a task-oriented approach to enable traceability of design rationale. International Journal of Agile Systems and Management 7(3-4), 324-347
Hansbo, P., Larson, M. (2014). Locking free quadrilateral continuous/discontinuous finite element methods for the Reissner–Mindlin plate. Computer Methods in Applied Mechanics and Engineering (pp. 381-393).
Hansbo, P., Larson, M. (2014). Finite element modeling of a linear membrane shell problem using tangential differential calculus. Computer Methods in Applied Mechanics and Engineering (pp. 1-14).
Hansbo, P., Larson, M., Larsson, K. (2014). Variational formulation of curved beams in global coordinates. Computational Mechanics 53(4), 611-623
Hilletofth, P. (2014). Achieving the potential of seminar teaching: A student-led approach. International Journal of Management in Education (IJMIE) 8(2), 160-167
Johansson, G., Sundin, E. (2014). Lean and green product development: two sides of the same coin?. Elsevier
Johansson, J. (2014). A Feature and Script Based Integration of CAD and FEA to Support Design of Variant Rich Products. Computer-Aided Design and Applications 11(5), 552-559
Lee, T., Chang, T., Hilletofth, P. (2014). Using Binary Logit Model to Develop the Target Consumer’s Differentiation Standards for the Marketing Activities in Tea Retailers Sales Observation Method. International Journal of Innovation and Learning 15(4), 432-446
Lee, T., Chen, C., Hilletofth, P., Hsu, Y. (2014). Key factors affecting customers’ willingness to use mobile coupons in a restaurant setting. International Journal of Management and Enterprise Development 13(3/4), 248-260
Löfving, M., Säfsten, K., Winroth, M. (2014). Manufacturing strategy frameworks suitable for SMEs. Journal of Manufacturing Technology Management 25(1), 7-26
Rashid, A. (2014). Overview of disc brakes and related phenomena – a review. International Journal of Vehicle Noise and Vibration 10(4), 257-301
Raudberget, D., Bjursell, C. (2014). A3 reports for knowledge codification, transfer and creation in research and development organisations. International Journal of Product Development 19(5/6), 413-431
Säfsten, K., Johansson, G., Lakemond, N., Magnusson, T. (2014). Interface challenges and managerial issues in the industrial innovation process. Journal of Manufacturing Technology Management 25(2), 218-239
Wlazlak, P., Johansson, G. (2014). R&D in Sweden and manufacturing in China: a study of communication challenges. Journal of Manufacturing Technology Management 25(2), 258-278
Yurtkulu, E., Hilletofth, P., Hilmola, O. (2014). Extended service use and new product possibilities in Swedish trucking. World Review of Intermodal Transportation Research (WRITR) 5(1), 80-98
Eriksson, D., Hilletofth, P., Hilmola, O. (2013). Linking Moral Disengagement to Supply Chain Practices. World Review of Intermodal Transportation Research (WRITR) 4(2/3), 207-225
Eriksson, D., Hilletofth, P., Hilmola, O. (2013). Supply chain configuration and moral disengagement. International Journal of procurement management 6(6), 718-736
Eriksson, D., Hilletofth, P., Hilmola, O. (2013). Creating value through wholesaler and retailer interface. Industrial management & data systems 113(8), 1169-1188
Havemose, K. (2013). The Encyclopedia Hands: From Design Thinking to Design Making. Swedish Design Research Journal (pp. 58-64).
Klarbring, A., Strömberg, N. (2013). Topology optimization of hyperelastic bodies including non-zero prescribed displacements. Structural and multidisciplinary optimization (Print) 47(1), 37-48
Lakemond, N., Magnusson, T., Johansson, G., Säfsten, K. (2013). Assessing interface challenges in product development projects. Research technology management 56(1), 40-48
Rashid, A., Strömberg, N. (2013). Sequential simulation of thermal stresses in disc brakes for repeated braking. Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology 227(8), 919-929
Rösiö, C., Säfsten, K. (2013). Reconfigurable Production System Design - theoretical and practical challenges. Journal of Manufacturing Technology Management 24(7), 998-1018
Berglund, M., Harlin, U., Gustavsson, M., Säfsten, K. (2012). New ways of organizing product introductions. Work 41(supplement 1), 4856-4861
Berglund, M., Karltun, A. (2012). Towards Understanding and Managing the Learning Process in Mail Sorting. Work 41(2), 115-126
Bruch, J., Bellgran, M. (2012). Creating a competitive edge when designing production systems: facilitating the sharing of design information. 4(3-4), 257-276
Bruch, J., Bellgran, M. (2012). Design information for efficient equipment supplier/buyer integration. Journal of Manufacturing Technology Management 23(4), 484-502
Burman, E., Hansbo, P. (2012). Fictitious domain finite element methods using cut elements: II. A stabilized Nitsche method. Applied Numerical Mathematics 62(4), 328-341
Eklund, J., Karltun, J. (2012). Ten years of experience from interactive ergonomics projects. Work (pp. 4862-4865).
Elgh, F. (2012). Decision Support in the Quotation Process of Engineered-to-order Products. Advanced Engineering Informatics 26(1), 66-79
Hansbo, P. (2012). Nonconforming rotated Q₁ tetrahedral element with explicit time stepping for elastodynamics. International Journal for Numerical Methods in Engineering 91(10), 1105-1114
Hilletofth, P. (2012). Differentiation focused supply chain design. Industrial management & data systems 112(9), 1274-1291
Hilletofth, P., Eriksson, D., Hilmola, O. (2012). Two Sides of a Token: Coordinating Demand and Supply at Furniture Wholesaler. 7(2), 101-122
Hilletofth, P., Lättilä, L. (2012). Framework for demand chain and supply chain coordination. 4(3/4), 240-256
Hilletofth, P., Lättilä, L. (2012). Agent based decision support in the supply chain context. Industrial management & data systems 112(8), 1217-1235
Klarbring, A., Strömberg, N. (2012). A Note on the Min-Max Formulation of Stiffness Optimization including Non-Zero Prescribed Displacements. Structural and multidisciplinary optimization (Print) 45(1), 147-149
Lakemond, N., Säfsten, K., Johansson, G., Magnusson, T. (2012). From Product Development to Production: On the Complexity of Geographical and Organizational Dispersion. Journal of Applied Economics and Business Research 2(3), 125-137
Short, T., Lee-Mortimer, A., Luttropp, C., Johansson, G. (2012). Manufacturing, sustainability, ecodesign and risk: lessons learned from a study of Swedish and English companies. Journal of Cleaner Production (pp. 342-352).
Wikner, J. (2012). A service decoupling point framework for logistics, manufacturing, and service operations. 4(3/4), 330-357
Winroth, M. (2012). A longitudinal study of Swedish manufacturing: eight short cases. Journal of Manufacturing Technology Management 23(4), 535-542
Xu, Y., Elgh, F., Erkoyuncu, J., Bankole, O., Goh, Y., Cheung, W. ... Roy, R. (2012). Cost Engineering for Manufacturing: Current and Future Research. International journal of computer integrated manufacturing (Print) 25(4/5), 300-314
Becker, R., Burman, E., Hansbo, P. (2011). A hierarchical NXFEM for fictitious domain simulations. International Journal for Numerical Methods in Engineering 86(4-5), 549-559
Becker, R., Burman, E., Hansbo, P. (2011). A finite element time relaxation method. Comptes rendus. Mathematique 349(5-6), 353-356
Eriksson, D., Hilletofth, P. (2011). The Importance of the Retailer for OEM Developing Innovative Products. Conradi Research Review 6(2), 63-81
Hansbo, P. (2011). A nonconforming rotated Q1 approximation on tetrahedra. Computer Methods in Applied Mechanics and Engineering 200(9-12), 1311-1316
Hansbo, P., Heintz, D., Larson, M. (2011). A finite element method with discontinuous rotations for the Mindlin-Reissner plate model. Computer Methods in Applied Mechanics and Engineering 200(5-8), 638-648
Hansbo, P., Larson, M. (2011). A posteriori error estimates for continuous/discontinuous Galerkin approximations of the Kirchhoff–Love plate. Computer Methods in Applied Mechanics and Engineering 200(47-48), 3289-3295
Hansbo, P., Larson, M. (2011). Energy norm a posteriori error estimates for discontinuous Galerkin approximations of the linear elasticity problem. Computer Methods in Applied Mechanics and Engineering 200(45-46), 3026-3030
Hilletofth, P., Eriksson, D. (2011). Coordinating new product development with supply chain management. Industrial management & data systems 111(2), 264-281
Johansson, J. (2011). How to Build Flexible Design Automation Systems for Manufacturability Analysis of the Draw Bending of Aluminum Profiles. Journal of manufacturing science and engineering 133(6),
Nilsson, B., Hansbo, P. (2011). Weak coupling of a Reynolds model and a Stokes model for hydrodynamic lubrication. International Journal for Numerical Methods in Fluids 66(6), 730-741
Nilsson, B., Hansbo, P. (2011). A Stokes model with cavitation for the numerical simulation of hydrodynamic lubrication. International Journal for Numerical Methods in Fluids 67(12), 2015-2025
Strömberg, N. (2011). An Eulerian Approach for Simulating Frictional Heating in Disc-Pad Systems. European journal of mechanics. A, Solids 30(5), 673-683
Burman, E., Hansbo, P. (2010). Interior-penalty-stabilized Lagrange multiplier methods for the finite-element solution of elliptic interface problems. IMA Journal of Numerical Analysis 30(3), 870-885
Burman, E., Hansbo, P. (2010). Fictitious domain finite element methods using cut elements: I. A stabilized Lagrange multiplier method. Computer Methods in Applied Mechanics and Engineering 199(41-44), 2680-2686
Fasth, Å., Bruch, J., Stahre, J., Dencker, K., Lundholm, T., Mårtensson, L. (2010). Designing proactive assembly systems: Criteria and interaction between automation, information, and competence. Asian International Journal of Science and Technology in production and manufacturing engineering (AIJSTPME) 2(4),
Gimbel, F., Hansbo, P., Suttmeier, F. (2010). An adaptive low-order FE-scheme for Stokes flow with cavitation. Journal of Numerical Mathematics 18(3), 177-185
Hansbo, P. (2010). A discontinuous finite element method for elasto-plasticity. International Journal for Numerical Methods in Biomedical Engineering 26(6), 780-789
Hansbo, P., Heintz, D., Larson, M. (2010). An adaptive finite element method for second-order plate theory. International Journal for Numerical Methods in Engineering 81(5), 584-603
Hansbo, P., Rylander, T. (2010). A linear nonconforming finite element method for Maxwell's equations in two dimensions. Part I: Frequency domain. Journal of Computational Physics 229(18), 6534-6547
Hofwing, M., Strömberg, N. (2010). D-optimality of non-regular design spaces by using a Bayesian modification and a hybrid method. Structural and multidisciplinary optimization (Print) 42(1), 73-88
Johansson, G., Winroth, M. (2010). Introducing environmental concerns in manufacturing strategies: Implications for the decision criteria. Management Research Review 33(9), 877-899
Lindström, V., Winroth, M. (2010). Aligning manufacturing strategy and levels of automation: A case study. Journal of engineering and technology management 27(3/4), 148-159
Raudberget, D. (2010). Practical Applications of Set-Based Concurrent Engineering in Industry. Strojniski vestnik 56(11), 685-695
Strömberg, N. (2010). Topology optimization of structures with manufacturing and unilateral contact constraints by minimizing an adjustable compliance–volume product. Structural and multidisciplinary optimization (Print) 42(3), 341-350
Strömberg, N., Klarbring, A. (2010). Topology Optimization of Structures in Unilateral Contact. Structural and multidisciplinary optimization (Print) 41(1), 57-64
Wong, H., Wikner, J., Naim, M. (2010). Evaluation of postponement in manufacturing systems with non-negligible changeover times. Production planning & control (Print) 21(3), 258-273
Becker, R., Burman, E., Hansbo, P. (2009). A Nitsche extended finite element method for incompressible elasticity with discontinuous modulus of elasticity. Computer Methods in Applied Mechanics and Engineering 198(41-44), 3352-3360
Fjällström, S., Säfsten, K., Harlin, U., Stahre, J. (2009). Information enabling production ramp-up. Journal of Manufacturing Technology Management 20(2), 178-196
Fredriksson, A., Johansson, E. (2009). Integrating logistics into the outsourcing process. International Journal of Logistics 12(4), 281-298
Gustafsson, E., Hofwing, M., Strömberg, N. (2009). Residual stresses in a stress lattice - experiments and finite element simulations. Journal of Materials Processing Technology 209(9), 4320-4328
Hansbo, P., Juntunen, M. (2009). Weakly imposed Dirichlet boundary conditions for the Brinkman model of porous media flow. Applied Numerical Mathematics 59(6), 1274-1289
Ireman, P., Klarbring, A., Strömberg, N. (2009). Gradient Theory of Damage Coupled to Frictional Contact and Wear, and Its Numerical Treatment. CMES - Computer Modeling in Engineering & Sciences 52(2), 125-158
Johansson, E. (2009). Information management for materials supply systems design. International Journal of Production Research 47(8), 2217-2229
Wong, H., Wikner, J., Naim, M. (2009). Analysis of form postponement based on optimal positioning of the differentiation point and stocking decisions. International Journal of Production Research 47(5), 1201-1224
Becker, R., Hansbo, P. (2008). A simple pressure stabilization method for the Stokes equation. Communications in Numerical Methods in Engineering 24(11), 1421-1430
Elgh, F. (2008). Supporting Management and Maintenance of Manufacturing Knowledge in Design Automation Systems. Advanced Engineering Informatics 22(4), 445-456
Elgh, F., Cederfeldt, M. (2008). Cost-based Producibility Assessment: Analysis and Synthesis Approaches through Design Automation. Journal of engineering design (Print) 19(2), 113-130
Gustafsson, E., Strömberg, N. (2008). Shape optimization of castings by using successive response surface methodology. Structural and multidisciplinary optimization (Print) 35(1), 11-28
Hansbo, P., Larson, M. (2008). Piecewise divergence-free discontinuous Galerkin methods for Stokes flow. Communications in Numerical Methods in Engineering 24(5), 355-366
Johansson, G. (2008). Product innovation for sustainability: on product properties for efficient disassembly. International Journal of Sustainable Engineering 1(1), 32-41
Johansson, G., Huge Brodin, M. (2008). An analysis of product properties affecting performance of end-of-life systems for electrical and electronics equipment. Management of environmental quality 19(6), 705-717
Magnusson, T., Johansson, G. (2008). Managing internal technology transfer in complex product development. European Journal of Innovation Management 11(3), 349-365
Wikner, J., Tang, O. (2008). A structural framework for closed-loop supply chains. The International Journal of Logistics Management 19(3), 344-366
Burman, E., Hansbo, P. (2007). A unified stabilized method for Stokes' and Darcy's equations. Journal of Computational and Applied Mathematics 198(1), 35-51
Cederfeldt, M. (2007). Towards a Strategy for Mapping of Design Problems to Suitable Solutions: A Case of Design Automation using CBR. Strojarstvo 49(1), 17-24
Elgh, F., Cederfeldt, M. (2007). Concurrent Cost Estimation as a Tool for Enhanced Producibility: System Development and Applicability for Producibility Studies. International Journal of Production Economics 109(1-2), 12-26
Elgh, F., Sunnersjö, S. (2007). An Ontology Approach To Collaborative Engineering For Producibility. International Journal of e-collaboration 3(4), 21-45
Johansson, G., Greif, A., Fleischer, G. (2007). Managing the design/environment interface: Studies of integration mechanisms. International Journal of Production Research 45(18-19), 4041-4055
Lakemond, N., Johansson, G., Magnusson, T., Säfsten, K. (2007). Interfaces between technology development, product development and production: critical factors and a conceptual model. International Journal of Technology Intelligence and Planning (IJTIP) 3(4), 317-330
Naim, M., Wikner, J., Grubbström, R. (2007). A Net Present Value Assessment of Make-To-Order and Make-To-Stock Manufacturing Systems. Omega 35(5), 524-532
Nilsson, B., Hansbo, P. (2007). Adaptive finite element methods for hydrodynamic lubrication with cavitation. International Journal for Numerical Methods in Engineering 72(13), 1584-1604
Säfsten, K., Winroth, M., Stahre, J. (2007). The content and process of automation strategies. International Journal of Production Economics 110(1-2), 25-38
Wikner, J., Naim, M., Rudberg, M. (2007). Exploiting the Order Book for Mass Customized Manufacturing Control Systems With Capacity Limitations. IEEE transactions on engineering management 54(1), 145-155
Winroth, M., Säfsten, K., Stahre, J. (2007). Automation strategies: Existing theory or ad hoc solutions?. International Journal of Manufacturing Technology and Management (IJMTM) 11(1), 98-114
Burman, E., Fernandez, M., Hansbo, P. (2006). Continuous interior penalty finite element method for Oseen's equations. SIAM Journal on Numerical Analysis 44(3), 1248-1274
Burman, E., Hansbo, P. (2006). Edge stabilization for the generalized Stokes problem: A continuous interior penalty method. Computer Methods in Applied Mechanics and Engineering 195(19-22), 2393-2410
Burman, E., Hansbo, P. (2006). A stabilized non-conforming finite element method for incompressible flow. Computer Methods in Applied Mechanics and Engineering 195(23-24), 2881-2899
Danilovic, M., Winroth, M. (2006). Corporate Manufacturing Network: From Hierarchy to Self-Organizing System. The International Journal of Integrated Supply Management 2(1/2), 106-131
Heintz, P., Hansbo, P. (2006). Stabilized Lagrange multiplier methods for bilateral elastic contact with friction. Computer Methods in Applied Mechanics and Engineering 195(33-36), 4323-4333
Johansson, E., Bellgran, M., Johansson, M. (2006). Evaluation of materials supply systems during product development projects. International Journal of Production Research 44(5), 903-917
Johansson, E., Johansson, M. (2006). Materials supply systems design in product development projects. International Journal of Operations & Production Management 26(4), 371-393
Johansson, G. (2006). Incorporating environmental concern in product development: A study of project characteristics. Management of environmental quality 17(4), 421-436
Johansson, G., Magnusson, T. (2006). Organising for environmental considerations in complex product development projects: Implications from introducing a “green” sub-project. Journal of Cleaner Production 14(15-16), 1368-1376
Karltun, A. (2006). Utvärdering av interventionsarbete med hälsofrämjande åtgärder: en metodologisk ansats.. Socialmedicinsk Tidskrift 83(2), 130-146
Olhager, J., Selldin, E., Wikner, J. (2006). Decoupling the Value Chain. International Journal of Value Chain Management 1(1), 19-32
Sunnersjö, S., Cederfeldt, M., Elgh, F., Rask, I. (2006). A Transparent Design System for Iterative Product Development. Journal of Computing and Information Science in Engineering 6(3), 300-307
Wikner, J. (2006). Analysis of Smoothing Techniques: Application to Production-Inventory Systems. Kybernetes 35(9), 1323-1347
Bergendahl, C., Lichtenvort, K., Johansson, G., Zackrisson, M., Nyyssönen, J. (2005). Environmental and Economic Implications of a Shift to Halogen-Free Printed Wiring Boards. Circuit world 31(3), 26-31
Burman, E., Hansbo, P. (2005). Stabilized Crouzeix-Raviart element for the Darcy-Stokes problem. Numerical Methods for Partial Differential Equations 21(5), 986-997
Danilovic, M., Winroth, M. (2005). A Tentative Framework for Analyzing Integration in Collaborative Manufacturing Network Settings: A case study. Journal of engineering and technology management 22(1-2), 141-158
Hansbo, P., Lovadina, C., Perugia, I., Sangalli, G. (2005). A Lagrange multiplier method for the finite element solution of elliptic interface problems using non-matching meshes. Numerische Mathematik 100(1), 91-115
Johansen, K., Comstock, M., Winroth, M. (2005). Coordination in Collaborative Manufacturing Mega-Networks: A Case Study. Journal of engineering and technology management 22(3), 226-244
Strömberg, N. (2005). An Implicit Method for Frictional Contact, Impact and Rolling. European journal of mechanics. A, Solids 24(6), 1016-1029
Wikner, J. (2005). Dynamic Analysis of a Production-Inventory Model. Kybernetes 34(6), 803-823
Wikner, J., Rudberg, M. (2005). Introducing a Customer Order Decoupling Zone in Logistics Decision-Making. International Journal of Logistics 8(3), 211-224
Wikner, J., Rudberg, M. (2005). Integrating Production and Engineering Perspectives on the Customer Order Decoupling Point. International Journal of Operations & Production Management 25(7), 623-641
Burman, E., Hansbo, P. (2004). Edge stabilization for Galerkin approximations of convection-diffusion-reaction problems. Computer Methods in Applied Mechanics and Engineering 193(15-16), 1437-1453
Hansbo, A., Hansbo, P. (2004). A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Computer Methods in Applied Mechanics and Engineering 193(33-35), 3523-3540
Hansbo, P., Hermansson, J., Svedberg, T. (2004). Nitsche's method combined with space-time finite elements for ALE fluid-structure interaction problems. Computer Methods in Applied Mechanics and Engineering 193(39-41), 4195-4206
Heintz, P., Larsson, F., Hansbo, P., Runesson, K. (2004). Adaptive strategies and error control for computing material forces in fracture mechanics. International Journal for Numerical Methods in Engineering 60(7), 1287-1299
Johansen, K., Comstock, M., Winroth, M. (2004). From Mass Production to Mass Customization: Enabling perspectives from the Swedish mobile telephone industry. Production planning & control (Print) 15(4), 362-372
Johansson, E., Johansson, M. (2004). The information gap between design engineering and materials supply systems design. International Journal of Production Research 42(17), 3787-3801
Johansson, E., Medbo, L. (2004). On the use of product data in the design of the materials supply system. Journal of Manufacturing Technology Management 15(7), 641-650
Klarbring, A., Lundvall, O., Strömberg, N. (2004). A flexible multi-body approach for frictional contact in spur gears. Journal of Sound and Vibration 278(3), 479-499
Rudberg, M., Wikner, J. (2004). Mass Customization in Terms of the Customer Order Decoupling Point. Production planning & control (Print) 15(4), 445-458
Winroth, M., Danilovic, M., Boix Miralles, R. (2004). Manufacturing Networks: Critical Factors to Successful Collaboration. CIRP Journal of Manufacturing Systems 33(3),
Becker, R., Hansbo, P., Larson, M. (2003). Energy norm a posteriori error estimation for discontinuous Galerkin methods. Computer Methods in Applied Mechanics and Engineering 192(5-6), 723-733
Becker, R., Hansbo, P., Stenberg, R. (2003). A finite element method for domain decomposition with non-matching grids. Mathematical Modelling and Numerical Analysis 37(2), 209-225
Comstock, M., Winroth, M. (2003). Enabling Mass Customization in the Mobile Telephone Industry: Agility, Flexibility and the Changing Role of Assembly at Ericsson. CIRP Journal of Manufacturing Systems 32(4),
Hansbo, A., Hansbo, P., Larson, M. (2003). A finite element method on composite grids based on Nitsche's method. Mathematical Modelling and Numerical Analysis 37(3), 495-514
Hansbo, P., Hermansson, J. (2003). Nitsche's method for coupling non-matching meshes in fluid-structure vibration problems. Computational Mechanics 32(1-2), 134-139
Hansbo, P., Larson, M. (2003). Discontinuous Galerkin and the Crouzeix-Raviart element: Application to elasticity. Mathematical Modelling and Numerical Analysis 37(1), 63-72
Hermansson, J., Hansbo, P. (2003). A variable diffusion method for mesh smoothing. Communications in Numerical Methods in Engineering 19(11), 897-908
Ireman, P., Klarbring, A., Strömberg, N. (2003). A model of damage coupled to wear. International Journal of Solids and Structures 40(12), 2957-2974
Larsson, F., Hansbo, P., Runesson, K. (2003). Space-time finite elements and an adaptive strategy for the coupled thermoelasticity problem. International Journal for Numerical Methods in Engineering 56(2), 261-293
Larsson, F., Runesson, K., Hansbo, P. (2003). Time finite elements and error computation for (visco)plasticity with hardening or softening. International Journal for Numerical Methods in Engineering 56(14), 2213-2232
Strömberg, N. (2003). A method for structural dynamic contact problems with friction and wear. International Journal for Numerical Methods in Engineering 58(15), 2371-2385
Wikner, J. (2003). Continuous-Time Dynamic Modelling of Variable Lead Times. International Journal of Production Research 41(12), 2787-2798
Winroth, M., Björkman, M. (2003). Manufacturing strategies: A survey among medium sized enterprises in Sweden. CIRP Journal of Manufacturing Systems 32(3),
Hansbo, A., Hansbo, P. (2002). An unfitted finite element method, based on Nitsche's method, for elliptic interface problems. Computer Methods in Applied Mechanics and Engineering 191(47-48), 5537-5552
Hansbo, P., Larson, M. (2002). Discontinuous Galerkin methods for incompressible and nearly incompressible elasticity by Nitsche's method. Computer Methods in Applied Mechanics and Engineering 191(17-18), 1895-1908
Hansbo, P., Larson, M. (2002). A discontinuous Galerkin method for the plate equation. Calcolo 39(1), 41-59
Ireman, P., Klarbring, A., Strömberg, N. (2002). Finite element algorithms for thermoelastic wear problems. European journal of mechanics. A, Solids 21(3), 423-440
Johansson, G. (2002). Success factors for integration of ecodesign in product development: A review of state of the art.
Larsson, F., Hansbo, P., Runesson, K. (2002). Strategies for computing goal-oriented a posteriori error measures in non-linear elasticity. International Journal for Numerical Methods in Engineering 55(8), 879-894
Säfsten, K., Aresu, E. (2002). Assembly System Design and Evaluation of 15 Manufacturing Companies in Sweden. Manufactoring Systems 31(1),
Säfsten, K., Winroth, M. (2002). Analysis of the congruence between manufacturing strategy and production system in SMME. Computers in industry (Print) 49(1), 91-106
Hansbo, P. (2001). A note on energy conservation for Hamiltonian systems using continuous time finite elements. Communications in Numerical Methods in Engineering 17(12), 863-869
Johansson, G., Magnusson, T. (2001). Planned or experience-based processes for ecodesign innovation: Exploring product development driven by environmental performance targets. International Journal of Environmental Technology and Management 1(1-2), 164-178
Olhager, J., Rudberg, M., Wikner, J. (2001). Long-Term Capacity Management: Linking the Perspectives from Manufacturing Strategy and Sales and Operations Planning. International Journal of Production Economics 69(2), 215-225
Winroth, M., Björkman, M. (2001). Application of Manufacturing Strategies: The influence of manufacturing strategies upon the decision process when investing in new assembly equipment. CIRP Journal of Manufacturing Systems
Hansbo, P. (2000). A Crank-Nicolson type space-time finite element method for computing on moving meshes. Journal of Computational Physics 159(2), 274-289
Hansbo, P. (2000). A free-Lagrange finite element method using space-time elements. Computer Methods in Applied Mechanics and Engineering 188(1-3), 347-361
Olhager, J., Wikner, J. (2000). Production Planning and Control Tools. Production planning & control (Print) 11(3), 210-222
Strömberg, N. (1999). A Newton method for three-dimensional fretting problems. International Journal of Solids and Structures 36(14), 2075-2090
Strömberg, N. (1999). Finite element treatment of two-dimensional thermoelastic wear problems. Computer Methods in Applied Mechanics and Engineering 177(3-4), 441-455
Christensen, X., Klarbring, A., Pang, J., Strömberg, N. (1998). Formulation and comparison of algorithms for frictional contact problems. International Journal for Numerical Methods in Engineering 42(1), 145-173
Hansbo, P. (1998). Moving finite element methods by use of space-time elements: I. Scalar problems. Numerical Methods for Partial Differential Equations 14(2), 251-262
Hansbo, P. (1998). A new approach to quadrature for finite elements incorporating hourglass control as a special case. Computer Methods in Applied Mechanics and Engineering 158(3-4), 301-309
Johansson, G., Magnusson, T. (1998). Eco-innovations - a novel phenomenon?. Journal of Sustainable Product Design (pp. 7-15).
Cannmo, P., Mähler, L., Runesson, K. (1997). Modelling of interfacial viscoplastic slip coupled to damage in a polycrystalline microstructure. Computational Mechanics 20(1-2), 12-19
Strömberg, N. (1997). An augmented Lagrangian method for fretting problems. European journal of mechanics. A, Solids 16(4), 573-593
Agrell, P., Wikner, J. (1996). A Coherent Methodology for Productivity Analysis Employing Integrated Partial Efficiency. International Journal of Production Economics (pp. 401-411).
Agrell, P., Wikner, J. (1996). An MCDM Framework for Dynamic Systems. International Journal of Production Economics 45(1-3), 279-292
Grubbström, R., Wikner, J. (1996). Inventory Trigger Control Policies Developed in Terms of Control Theory. International Journal of Production Economics 45(1-3), 397-406
Strömberg, N., Johansson, L., Klarbring, A. (1996). Derivation and analysis of a generalized standard model for contact, friction and wear. International Journal of Solids and Structures 33(13), 1817-1836
Cannmo, P., Runesson, K., Ristinmaa, M. (1995). Modelling of plasticity and damage in a polycrystalline microstructure. International journal of plasticity 11(8), 949-970
Eriksson, K., Estep, D., Hansbo, P., Johnson, C. (1995). Introduction to Adaptive Methods for Differential Equations. Acta Numerica (pp. 105-158).
Hansbo, P. (1995). Lagrangian incompressible flow computations in three dimensions by use of space-time finite elements. International Journal for Numerical Methods in Fluids 20(8-9), 989-1001
Hansbo, P. (1995). Generalized Laplacian smoothing of unstructured grids. Communications in Numerical Methods in Engineering 11(5), 455-464
Möller, P., Hansbo, P. (1995). On advancing front mesh generation in three dimensions. International Journal for Numerical Methods in Engineering 38(21), 3551-3569
Hansbo, P. (1994). Space-time oriented streamline diffusion methods for nonlinear conservation laws in one dimension. Communications in Numerical Methods in Engineering 10(3), 203-215
Hansbo, P. (1994). Aspects of conservation in finite-element flow computations. Computer Methods in Applied Mechanics and Engineering 117(3-4), 423-437
Hansbo, P. (1993). Explicit streamline diffusion finite-element methods for the compressible Euler equations in conservation variables. Journal of Computational Physics 109(2), 274-288
Hansbo, P. (1992). The characteristic streamline diffusion method for the time-dependent incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering 99(2-3), 171-186
Hansbo, P. (1992). The characteristic streamline diffusion method for convection-diffusion problems. Computer Methods in Applied Mechanics and Engineering 96(2), 239-253
Johnson, C., Hansbo, P. (1992). Adaptive finite element methods in computational mechanics. Computer Methods in Applied Mechanics and Engineering 101(1-3), 143-181
Towill, D., Naim, M., Wikner, J. (1992). Industrial Dynamics Simulation Models in the Design of Supply Chains. International Journal of Physical Distribution & Logistics Management 22(5), 3-13
Wikner, J., Naim, M., Towill, D. (1992). The System Simplification Approach in Understanding the Dynamic Behaviour of a Manufacturing Supply Chain. Journal of Systems Engineering (pp. 164-178).
Hansbo, P., Johnson, C. (1991). Adaptive streamline diffusion methods for compressible flow using conservation variables. Computer Methods in Applied Mechanics and Engineering 87(2-3), 267-280
Wikner, J., Towill, D., Mohammed, N. (1991). Smoothing Supply Chain Dynamics. International Journal of Production Economics 22(3), 231-248
Hansbo, P., Szepessy, A. (1990). A velocity pressure streamline diffusion finite-element method for the incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering 84(2), 175-192
Johnson, C., Szepessy, A., Hansbo, P. (1990). On the convergence of shock capturing streamline diffusion finite-element methods for hyperbolic conservation-laws. Mathematics of Computation 54(189), 107-129

Bok

Andersen, A., Andersen, R., Napoleone, A., Brunø, T., Kjeldgaard, S., Nielsen, K. ... Skärin, F. (2023). Paving the way for changeable and reconfigurable production: Fundamental principles, development method & examples. Aalborg: REKON Press
Melander, A., Andersson, D., Elgh, F., Fjellstedt, F., Löfving, M. (2022). Implementing Hoshin Kanri: How to Manage Strategy Through Policy Deployment and Continuous Improvement. New York: Productivity Press
Melander, A., Andersson, D., Elgh, F., Fjellstedt, F., Löfving, M., Thulin, M. (2020). Hoshin Kanri: Innovativ ledning av strategiarbete. Lund: Studentlitteratur AB
Säfsten, K., Gustavsson, M. (2020). Research methodology: For engineers and other problem-solvers. Lund: Studentlitteratur AB
Säfsten, K., Gustavsson, M. (2019). Forskningsmetodik: för ingenjörer och andra problemlösare. Lund: Studentlitteratur AB
Abrahamsson, L., Bengtsson, L., Gremyr, I., Kowalkowski, C., Lindahl, M., Nilsson, A. ... Öhman, P. (2016). Industriell ekonomi och organisering. Stockholm: Liber
Havemose, K. (2012). Ting i rörelse - om designprocessen. Stockholm: Santérus Academic Press Sweden
Säfsten, K., Johansson, G., Lakemond, N., Magnusson, T. (2010). Effektiv Produktframtagning: analys och hantering av osäkerhet, komplexitet och spridning. Lund: Studentlitteratur
Bellgran, M., Säfsten, K. (2009). Production Development: Design and Operation of Production Systems. London: Springer
Bellgran, M., Säfsten, K. (2005). Produktionsutveckling: utveckling och drift av produktionssystem. Lund: Studentlitteratur
Eriksson, K., Estep, D., Hansbo, P., Johnson, C. (1996). Computational differential equations. Cambridge University Press

Antologibidrag

Artikel (icke refereegranskat)

Artikel (refereegranskat)

Bok

Doktorsavhandling

Konferensbidrag

Licentiatavhandling

Proceedings (redaktörskap)

Rapport

Samlingsvolym (redaktörskap)

Övrigt