Salem Seifeddine

Professor Materials and Manufacturing
Executive Vice President
President's Office , Jönköping University
PhD

Biography

Salem Seifeddine received his Doctorate in Engineering Materials from Linkoping University in 2006 and is currently professor at the department of Materials and Manufacturing. Salem Seifeddine has published more than 70 scientific articles in journals and conferences and cooperates with a number of national and international universities, institutes and industrial partners.

Research

The main goals of the research conducted by Salem Seifeddine is to establish a quantitative prediction of mechanical properties of aluminium cast alloys and components through process simulation based upon microstructure modelling approaches. His work and research focus primarily on the understanding of phase precipitation and development of microstructure, defects and mechanical behavior of cast aluminium alloys, in order to establish a methodology in bringing the foundry process closer to the casting designer leading to a more reliable and more optimized design. 

Article

Bogdanoff, T., Ghassemali, E., Jarfors, A., Seifeddine, S. (2024). The impact of HIP process and heat treatment on the mechanical behaviour of an Al–Si–Mg alloy component International Journal of metalcasting. More information
Bogdanoff, T., Tiryakioğlu, M., Jarfors, A., Seifeddine, S., Ghassemali, E. (2023). On the combined effects of surface quality and pore size on the fatigue life of Al–7Si–3Cu–Mg alloy castings Materials Science & Engineering: A, 885. More information
Bogdanoff, T., Börjesson, J., Seifeddine, S., Tiryakioğlu, M., Ghassemali, E. (2023). On the secondary cracks during crack propagation in an Al-Si-Cu-Mg alloy: An in-situ study Materials Characterization, 203. More information
Bogdanoff, T., Tiryakioglu, M., Liljenfors, T., Jarfors, A., Seifeddine, S., Ghassemali, E. (2023). On the Effectiveness of Rotary Degassing of Recycled Al-Si Alloy Melts: The Effect on Melt Quality and Energy Consumption for Melt Preparation Sustainability, 15(6). More information
Tan, H., Tarasov, V., Jarfors, A., Seifeddine, S. (2021). A design of fuzzy inference systems to predict tensile properties of as-cast alloy The International Journal of Advanced Manufacturing Technology, 113(3-4), 1111-1123. More information
Bogdanoff, T., Lattanzi, L., Merlin, M., Ghassemali, E., Jarfors, A., Seifeddine, S. (2021). The complex interaction between microstructural features and crack evolution during cyclic testing in heat-treated Al–Si–Mg–Cu cast alloys Materials Science & Engineering: A, 825. More information
Zamani, M., Toschi, S., Morri, A., Ceschini, L., Seifeddine, S. (2020). Optimisation of heat treatment of Al–Cu–(Mg–Ag) cast alloys Journal of thermal analysis and calorimetry (Print), 139, 3427-3440. More information
Ceschini, L., Messieri, S., Morri, A., Seifeddine, S., Toschi, S., Zamani, M. (2020). Effect of Cu addition on overaging behaviour, room and high temperature tensile and fatigue properties of A357 alloy Transactions of Nonferrous Metals Society of China, 30(11), 2861-2878. More information
Tarasov, V., Tan, H., Jarfors, A., Seifeddine, S. (2020). Fuzzy logic-based modelling of yield strength of as-cast A356 alloy Neural Computing & Applications, 32(10), 5833-5844. More information
Zamani, M., Belov, I., Sjölander, E., Bjurenstedt, A., Ghassemali, E., Seifeddine, S. (2020). Study on dissolution of Al2Cu in al-4.3cu and a205 cast alloys Metals, 10(7), 1-17. More information
Bogdanoff, T., Lattanzi, L., Merlin, M., Ghassemali, E., Seifeddine, S. (2020). The influence of copper addition on crack initiation and propagation in an Al–Si–Mg alloy during cyclic testing Materialia, 12. More information
Zhu, B., Seifeddine, S., Jarfors, A., Leisner, P., Zanella, C. (2019). A study of anodising behaviour of Al-Si components produced by rheocasting Solid State Phenomena, 285, 39-44. More information
Bjurenstedt, A., Ghassemali, E., Seifeddine, S., Dahle, A. (2019). The effect of Fe-rich intermetallics on crack initiation in cast aluminium: an in-situ tensile study Materials Science & Engineering: A, 756, 502-507. More information
Tan, H., Tarasov, V., Jarfors, A., Seifeddine, S. (2019). Fuzzy Logic Based Modelling of Cast Component Properties IFAC-PapersOnLine, 52(13), 1132-1137. More information
Bogdanoff, T., Dahle, A., Seifeddine, S. (2018). Effect of Co and Ni Addition on the Microstructure and Mechanical Properties at Room and Elevated Temperature of an Al–7%Si Alloy International Journal of metalcasting, 12(3), 434-440. More information
Wójcik, N. Jonson, B. Möncke, D. Palles, D. Kamitsos, E. Ghassemali, E. , ... Ali S. (2018). Influence of synthesis conditions on glass formation, structure and thermal properties in the Na2O-CaO-P2O5 system doped with Si3N4 and Mg Journal of Non-Crystalline Solids, 494, 66-77. More information
Ceschini, L., Morri, A., Toschi, S., Bjurenstedt, A., Seifeddine, S. (2018). Influence of sludge particles on the fatigue behavior of Al-Si-Cu secondary aluminium casting alloys Metals, 8(4). More information
Bjurenstedt, A., Casari, D., Seifeddine, S., Mathiesen, R., Dahle, A. (2017). In-situ study of morphology and growth of primary α-Al(FeMnCr)Si intermetallics in an Al-Si alloy Acta Materialia, 130, 1-9. More information
Zamani, M., Dini, H., Svoboda, A., Lindgren, L., Seifeddine, S., Andersson, N., Jarfors, A. (2017). A dislocation density based constitutive model for as-cast Al-Si alloys: Effect of temperature and microstructure International Journal of Mechanical Sciences, 121, 164-170. More information
Riestra, M., Ghassemali, E., Bogdanoff, T., Seifeddine, S. (2017). Interactive effects of grain refinement, eutectic modification and solidification rate on tensile properties of Al-10Si alloy Journal of materials processing & manufacturing science (Print), 703, 270-279. More information
Ali, S., Bogdanoff, T., Seifeddine, S., Jonson, B. (2017). Hardness, elastic modulus and refractive index of oxynitride glasses prepared from woody biofuel ashes , 58(6), 231-236. More information
Zamani, M., Morini, L., Ceschini, L., Seifeddine, S. (2017). The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys , 693, 42-50. More information
Awe, S., Seifeddine, S., Jarfors, A., Lee, Y., Dahle, A. (2017). Development of new Al-Cu-Si alloys for high temperature performance Advanced Materials Letters, 8(6), 695-701. More information
Riestra, M., Seifeddine, S., Sjölander, E. (2016). Tailoring Al-7Si-0.3Mg cast alloy properties to represent HPDC tensile and fatigue behaviour in component prototypes La Metallurgia Italiana, 108(6), 33-36 Milano: Associazione Italiana di Metallurgia . More information
Bogdanoff, T., Seifeddine, S., Dahle, A. (2016). The effect of SI content on microstructure and mechanical properties of Al-Si alloy La Metallurgia Italiana, 108(6) Milano: Associazione Italiana di Metallurgia . More information
Zamani, M., Seifeddine, S., Ghassemali, E. (2016). Effect of cooling rate and eutectic modification on texture and grain structure of Al-Si-Cu-Mg die cast alloy La Metallurgia Italiana, 108(6), 5-8 Milano: Associazione Italiana di Metallurgia . More information
Ceschini, L., Morri, A., Toschi, S., Boromei, I., Bjurenstedt, A., Seifeddine, S. (2016). Al-Si-Cu alloys for high pressure die casting: Influence of Fe, Mn, and Cr on room temperaturemechanical properties La Metallurgia Italiana, 77-80 Milano: Associazione Italiana di Metallurgia . More information
Ceschini, L., Morri, A., Toschi, S., Seifeddine, S. (2016). Room and high temperature fatigue behaviour of the A354 and C355 (Al-Si-Cu-Mg) alloys: Role of microstructure and heat treatment Materials Science & Engineering: A, 653, 129-138. More information
Zamani, M., Seifeddine, S. (2016). Determination of Optimum Sr Level for Eutectic Si Modification in Al–Si Cast Alloys Using Thermal analysis and Tensile Properties International Journal of metalcasting, 10(4), 457-465. More information
Zhu, B., Leisner, P., Seifeddine, S., Jarfors, A. (2016). Influence of Si and cooling rate on microstructure and mechanical properties of Al–Si–Mg cast alloys Surface and Interface Analysis, 48(8), 861-869. More information
Zhu, B., Seifeddine, S., Persson, P., Jarfors, A., Leisner, P., Zanella, C. (2016). A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques Materials & design, 101, 254-262. More information
Bjurenstedt, A., Seifeddine, S., Jarfors, A. (2016). The effects of Fe-particles on the tensile properties of Al-Si-Cu alloys Metals, 6(12). More information
Ceschini, L., Morri, A., Toschi, S., Johansson, S., Seifeddine, S. (2015). Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature Materials Science & Engineering: A, 648, 340-349. More information
Ceschini, L., Morri, A., Toschi, S., Seifeddine, S., Johansson, S. (2015). Effect of microstructure and overaging on the tensile behaviour at room and elevated temperature of C355-T6 cast aluminum alloy Materials & design, 83, 626-634. More information
Borkar, H., Seifeddine, S., Jarfors, A. (2015). In-situ EBSD study of deformation behavior of Al-Si-Cu alloys during tensile testing Materials & design, 84, 36-47. More information
Zamani, M., Seifeddine, S., Jarfors, A. (2015). High Temperature Tensile Deformation Behaviour and Failure Process of an Al-Si-Cu-Mg Cast Alloy: The Microstructural Scale Effect Materials & design, 86, 361-370. More information
Bjurenstedt, A., Seifeddine, S., Jarfors, A. (2015). On the complexity of the relationship between microstructure and tensile properties in cast aluminum International Journal of Modern Physics B, 29(10-11). More information
Borkar, H., Seifeddine, S., Jarfors, A. (2015). Microstructure analysis of Al-Si-Cu alloys prepared by gradient solidification technique International Journal of Modern Physics B, 29(10-11). More information
Jarfors, A., Rigovacca, D., Payandeh, M., Wessén, M., Seifeddine, S., Jansson, P. (2015). Influence of process parameters on surface appearance and roughness of a low Si containing Al-alloy, in semisolid casting Solid State Phenomena, 217-218, 318-324 Switzerland: Trans Tech Publications Inc. . More information
Ferraro, S., Bjurenstedt, A., Seifeddine, S. (2015). On the formation of sludge intermetallic particles in secondary aluminum alloys Metallurgical and Materials Transactions. A, 46(8), 3713-3722. More information
Sjölander, E., Seifeddine, S., Fracasso, F. (2015). Influence of Quench Rate on the Artificial Ageing Response of an Al-8Si-0.4Mg Cast Alloy Materials Science Forum, 828-829, 219-225. More information
Ceschini, L., Jarfors, A., Morri, A., Rotundo, F., Seifeddine, S., Toschi, S. (2014). High temperature tensile behaviour of the A354 aluminum alloy Materials Science Forum, 794-796, 443-448. More information
Sjölander, E., Seifeddine, S. (2014). Optimization of solution treatment of cast Al-7Si-0.3Mg and Al-8Si-3Cu-0.5Mg alloys Metallurgical and Materials Transactions. A, 45(4), 1916-1927. More information
Ceschini, L., Jarfors, A., Seifeddine, S., Morri, A., Rotundo, F., Toschi, S. (2014). Influence of SDAS on the high temperature tensile behavior of the C355 Al alloy Materials Science Forum, 783-786, 228-233. More information
Bjurenstedt, A., Seifeddine, S., Liljenfors, T. (2013). Assessment of Quality when Delivering Molten Aluminium Alloys Instead of Ingots Materials Science Forum, 765, 266-270. More information
Seifeddine, S., Sjölander, E., Bogdanoff, T. (2013). On the role of copper and cooling rates on the microstructure, defect formations and mechanical properties of Al-Si-Mg alloys Materials Sciences and Applications, 4(3), 171-178. More information
Sjölander, E., Seifeddine, S. (2013). Influence of alloy composition, solidification rate and artificial aging on plastic deformation behaviour of Al-Si-Cu-Mg casting alloys International Journal of Cast Metals Research, 26(1), 28-36. More information
Ceschini, L., Boromei, I., Seifeddine, S., Svensson, I. (2012). Effect of Fe content and microstructural features on the tensile and fatigue properties of the Al-Si10-Cu2 alloy Materials & design, 36, 522-528. More information
Sjölander, E., Seifeddine, S. (2012). The influence of natural ageing on the artificial ageing response of Al-Si-Cu-Mg casting alloys La Metallurgia Italiana, 11-12, 39-43 Milano: Associazione Italiana di Metallurgia . More information
Sjölander, E., Seifeddine, S. (2011). Evaluating the plastic deformation of Al-Si-Cu-Mg casting alloys using the Hollomon and Ludwigson equations International Journal of Cast Metals Research. More information
Sjölander, E., Seifeddine, S. (2011). Artificial ageing of Al–Si–Cu–Mg casting alloys Materials Science & Engineering: A, 528(24), 7402-7409. More information
Sjölander, E., Svensson, I., Seifeddine, S. (2011). Modelling yield strength of heat treated Al–Si–Mg casting alloys International Journal of Cast Metals Research, 24(6), 338-346. More information
Sjölander, E., Seifeddine, S. (2010). Optimisation of solution treatment of cast Al–Si–Cu alloys Materials & design, 31(suppl. 1), 44-49. More information
Sjölander, E., Seifeddine, S. (2010). The heat treatment of Al–Si–Cu–Mg casting alloys Journal of Materials Processing Technology, 210(10), 1249-1259. More information
Seifeddine, S., Svensson, I. (2010). Prediction of mechanical properties of cast aluminium components at various iron contents Materials & design, 31(Supplement 1), S6-S12. More information
Seifeddine, S., Sjögren, T., Flansbjer, M. (2009). Inverkan av porer på mekaniska egenskaper i gjutna aluminiumkomponenter Gjuteriet, 99(5), 20-23. More information
Seifeddine, S., Svensson, I. (2009). Att förutsäga variationer i egenskaper hos gjutna aluminiumkomponenter Gjuteriet, 99(3), 8-10. More information
Seifeddine, S., Svensson, I. (2009). The influence of iron, manganese and cooling rate on the microstructure and mechanical properties of A380-die casting Metallurgical Science and Technology, 27(1), 11-20. More information
Ceschini, L., Boromei, I., Morri, A., Seifeddine, S., Svensson, I. (2009). Microstructure, tensile and fatigue properties of the Al–10%Si–2%Cu alloy with different Fe and Mn content cast under controlled conditions Journal of Materials Processing Technology, 209(15-16), 5669-5679. More information
Seifeddine, S., Johansson, S., Svensson, I. (2008). The influence of cooling rate and manganese content on the beta Al5FeSi phase formation and mechanical properties of Al-Si based alloys Materials Science & Engineering: A, 490(1-2), 385-390. More information
Seifeddine, S., Timelli, G., Svensson, I. (2007). The Influence of Quench Rate on the Microstructure and Mechanical Properties of Aluminium Alloys A356 and A354 Giessereiforschung (International Foundry Research), 59(1), 12-21. More information
Seifeddine, S., Sjögren, T., Svensson, I. (2007). Variations in Microstructure and Mechanical Properties of Cast Aluminium EN AC 43100 Alloy Metallurgical Science & Technology, 25(1). More information
Seifeddine, S., Wessén, M., Svensson, I. (2007). Use of simulation to predict microstructure and mechanical properties in an as-cast aluminium cylinder head: comparison with experiments Metallurgical Science & Technology, 24(2), 7-. More information
Seifeddine, S., Svensson, I. (2006). The Effect of Cooling Conditions and Variation of Alloying Elements on the Microstructural and Mechanical Properties of Al-7%Si Cast Alloys International Foundry Research, 58(3). More information
Seifeddine, S., Olsson, J. (2005). Bilindustrin satsar på gjutna aluminiumkomponenter Gjuteriet, 5, 24-. More information

Doctoral thesis

Seifeddine, S. (2006). Characteristics of cast aluminium-silicon alloys: microstructures and mechanical properties (Doctoral thesis, Linköping: Linköpings universitet). More information

Book chapter

Ceschini, L., Morri, A., Toschi, S., Seifeddine, S., Messieri, S. (2017). The influence of cooling rate on microstructure, tensile and fatigue behavior of heat treated Al-Si-Cu-Mg alloys. In: Lars Arnberg, Franco Bonollo and Roberto Montanari (Ed.), Liquid metals and alloys: From structure to industrial applications (pp. 81 -92). More information
Jarfors, A., Seifeddine, S. (2014). Metal casting. In: Andrew Y. C. Nee (Ed.), Handbook of Manufacturing Engineering and Technology (pp. 309 -410). London: Springer More information

Conference paper

Bogdanoff, T., Ghassemali, E., Jarfors, A., Seifeddine, S. (2023). The impact of HIP process and heat treatment on the mechanical behavior of an Al-Si-Mg alloy component. 10th International Light Metals Technology Conference (LMT2023), 10–12 July 2023, Melbourne, Australia. More information
Olofsson, J., Bjurenstedt, A., Seifeddine, S. (2019). On the effects of defects and imperfections on tensile toughness of a secondary aluminium alloy. Shape casting : 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday. More information
Borkar, H., Seifeddine, S., Jarfors, A. (2019). Microstructure, texture and mechanical properties of al alloy a380 prepared by directional solidification method. 9th International Conference on Manufacturing Science and Technology, ICMST 2018, Kuala Lumpur, Malaysia, 11 - 13 August 2018. More information
Bogdanoff, T., Ghassemali, E., Riestra, M., Seifeddine, S. (2019). Prototyping of a high pressure die cast al-si alloy using plaster mold casting to replicate corresponding mechanical properties. Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, San Antonio, United States, 10 - 14 March 2019. More information
Svidró, J., Seifeddine, S., Ghassemali, E. (2018). Innovation in knowledge transfer from academia to the foundry industry - An advanced case. 73rd World Foundry Congress "Creative Foundry", 23-27 September 2018, Kraków, Poland. More information
Svanängen, P., Svidró, J., Seifeddine, S., Gustavsson, C. (2018). Life long educaion of foundry employees - A step forward. 73rd World Foundry Congress "Creative Foundry", 23-27 September 2018, Kraków, Poland. More information
Keller, C., Wass, S., Zetterlind, M., Ghassemali, E., Seifeddine, S. (2017). Teacher roles in a blended learning materials engineering master program: "It's not a new role, it's a new way!". 26th EDEN Annual Conference 2017: Diversity matters, Jönköping, 13-16 June, 2017.. More information
Ghassemali, E., Riestra, M., Bogdanoff, T., Kumar, B., Seifeddine, S. (2017). Hall-Petch Equation in a Hypoeutectic Al-Si Cast Alloy: Grain Size vs. Secondary Dendrite Arm Spacing. International Conference on the Technology of Plasticity, ICTP 2017; Hucisko; United Kingdom; 17 September 2017 through 22 September 2017. More information
Christina, K., Wass, S., Seifeddine, S., Zetterlind, M., Jarfors, A., Vomacka, P. (2016). Structured knowledge transfer through online education: Mutual benefits for academia and industry. 8th International Materials Education Symposium, Cambridge, April 7-8, 2016. More information
Dugic, I., Seifeddine, S., Henriksson, F., Strebel, C., Holmgren, M. (2016). Ways to improve mechanical properties of recycled aluminium alloys. 56th International Foundry Conference, in Portorož, Slovenia, 14th – 16th September 2016. More information
Dugic, I., Henriksson, F., Strebel, C., Kosmaz, O., Seifeddine, S. (2016). On the Effects of Alloying Element Range on the Mechanical Properties of Recycled Aluminium Alloy EN AB-46000. 145th TMS - Annual Meeting & Exhibition, Nashville, Tennessee, USA, February 14–18, 2016.. More information
Awe, S., Seifeddine, S., Jarfors, A., Dahle, A. (2016). Development of cast Al-Cu-Si ternary eutectic alloys for high temperature applications. Linköping: VBRI Press, European Advanced Materials Congress, 23-25 August 2016, Stockholm, Sweden. More information
Seifeddine, S., Zetterlind, M., Keller, C., Jarfors, A. (2015). Development of an online learning master program with specialization in cast metals engineering: Challenges and opportunities. 7th International Materials Education Symposium, Cambridge, United Kingdom. More information
Zhu, B., Leisner, P., Zanella, C., Persson, P., Seifeddine, S., Jarfors, A. (2015). A study of formation and growth of the anodized surface layer on Al-Si casting alloys based on different analytical techniques. EastForum 2015, Lund, 25-26 June, 2015.. More information
Seifeddine, S., Zetterlind, M., Rosqvist, M., Hansson, H. (2015). Gjutmagistern 3.0 och PROMPT är projekt som bidrar till ny expertkompetens inom svensk industri. Högskola och Samhälle i Samverkan 2015. More information
Zamani, M., Seifeddine, S. (2015). A Novel Approach for the Assessment of Eutectic Si Modification and Tensile Properties of Al-Si Cast Alloys. American Foundry Society (AFS) 2015, Design & Production of High Quality Aluminum Castings Conference, Nashville, 5-7 October, 2015. More information
Zamani, M., Seifeddine, S. (2015). Assessment of modification level in En AC-46000 aluminum casting alloy using thermal analysis and microscopic evaluation. TMS 2015, Orlando, Florida, March 15-19, 2015. More information
Zhu, B., Leisner, P., Zanella, C., Persson, P., Seifeddine, S., Jarfors, A. (2015). A study of formation and growth of the anodised surface layer on Al-Si casting alloys based on different analytical techniques. EastForum 2015 : Progress in Functional and Sustainable Surface Technology, Lund, June 25-26, 2015.. More information
Zhu, B., Leisner, P., Seifeddine, S., Jarfors, A. (2015). Influence of Si and cooling rate on microstructure and mechanical properties of Al-Si-Mg cast alloys. VII Aliminum Surface Science & Technology, Madeira, Portugal, 17-21 May, 2015. More information
Zamani, M., Seifeddine, S., EW Jarfors, A. (2014). Effects of microstructure and defects on tensile and fracture behaviour of a HPDC component: Potential properties and actual outcome of En AC-44300 alloy. TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014: San Diego, CA, USA. More information
Seifeddine, S., Poletaeva, D., Ghorbani, M., Jarfors, A. (2014). Heat treating of High Pressure Die Cast Components; challenges and possibilities. The Minerals, Metals and Materials Society, 143rd annual meeting,TMS 2014,San Diego, USA. More information
Zamani, M., Seifeddine, S., Aziziderouei, M. (2013). The role of Sr on microstructure formations and mechanical properties of  Al-Si-Cu-Mg casting alloy. TMS 2013, 142nd Annual Meeting & Exhibition, March 3-7, 2013: San Antonio, TX, USA. More information
Seifeddine, S. (2013). Extending the properties of aluminium castings. Jönköping, Sweden CIC Foundry Technology Forum 2013. More information
Zamani, M., Seifeddine, S., Aziziderouei, M. (2013). The role of Sr on microstructure formation and mechanical properties of Al-Si-Cu-Mg cast alloy. TMS 2013 Annual Meeting and Exhibition; San Antonio, TX; United States; 3 March 2013 through 7 March 2013. More information
Jarfors, A., Seifeddine, S., Olofsson, J., Svensson, I. (2013). Critical Description of Defects and Mechanical Behaviour in Casting Process Modelling of Light Metals for Automotive Use. 22nd International Conference on Processing and Fabrication of Advanced Materials (PFAM XXII), Singapore, 18-20 December, 2013. More information
Seifeddine, S. (2012). influence of Mg and Cu on heat treatment response of aluminium castings. Jönköping, Sweden CIC - Cost efficient cast components, Jönköping 5-6 September 2012. More information
Sjölander, E., Seifeddine, S. (2012). Influence of natural ageing on the artificial ageing response of Al-Si casting alloys. 5th High Tech Die Casting 2012. More information
Svensson, I., Seifeddine, S., Elmquist, L., Sjölander, E., Sjögren, T. (2012). On characterization and modeling of mechanical properties of materials for cast components. WFC 2012, World Foundry Congress, Monterrey, Mexico, 24-27 April, 2012. More information
Schneider, M., Schaefer, W., Sjölander, E., Seifeddine, S., Svensson, I. (2012). Simulation of Microstructure and Mechanical Properties of Aluminum Components during Casting and Heat Treatment. Modeling of Casting, Welding and Advanced Solidification Processes. More information
Morri, A., Ceschini, L., Svensson, I., Seifeddine, S. (2012). Relationship between pore volume (by density measurements) and pore area  (on fracture surfaces) of A356 fatigue specimens. New York: John Wiley & Sons, TMS 2012 141st Annual Meeting and Exhibition, March 11-15, Orlando, Florida. More information
Seifeddine, S., Holmgren, D. (2011). Design Education: Now and in the Future!. 3rd International Materials Education Symposium Cambridge, 7th - 8th April 2011. More information
Kappey, J., Schneider, M., Svensson, I., Sjölander, E., Seifeddine, S., Shahid, A., Arnberg, L. (2010). Microstructure, Defects and Properties in Aluminium Alloy Castings: Modelling and Simulation. 1st Conference on Multiphysics Simulation: Conference on Multiphysics Simulation. More information
Svensson, I., Seifeddine, S., Hattel, J., Kotas, P., Thorborg, J. (2009). On modelling of microstructure formation, local mechanical properties and Stress: Strain development in aluminium castings. 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. More information
Seifeddine, S., Svensson, I. (2009). Prediction of mechanical properties of cast aluminium components at various iron contents. 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. More information
Ceschini, L., Boromei, I., Morri, A., Seifeddine, S., Svensson, I. (2008). Tensile and fatigue behaviour of an AlSi10Cu alloy cast under controlled solidification conditions. 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. More information
Seifeddine, S., Svensson, I. (2008). The influence of Fe content and cooling rate on the microstructure and mechanical properties of A380- die casting alloys. 12th International Conference on Modeling of Casting, Welding, and Advanced Solidification Processes. More information
Seifeddine, S., Kotas, P., Hattel, J., Svensson, I. (2007). Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings. International Ph.D. Foundry Conference, Brno, June 2007, Czech Republic. More information
Cannmo, P., Seifeddine, S., Svensson, L., Svensson, I. (2006). Stress-Strain Modelling Influenced by Porosities in Cast Aluminium Alloys. International Ph.D. Foundry Conference, Brno, June 2007, Czech Republic. More information
Wessén, M., Svensson, I., Seifeddine, S., Olsson, J., Schäfer, W. (2006). Simulation of Cooling Curves, Microstructures and Mechanical Properties in Cast Al-Si Based Alloys. International Ph.D. Foundry Conference, Brno, June 2007, Czech Republic. More information
Schneider, M., Schaefer, W., Mazourkevitch, G., Wessén, M., Svensson, I., Seifeddine, S. (2005). Prediction of Microstructure and Microporosity Development in Aluminium Gravity Casting Processes. International Ph.D. Foundry Conference, Brno, June 2007, Czech Republic. More information
Seifeddine, S., Sjögren, T., Svensson, I. (2004). The Influence of Al5FeSi on the Tensile Properties of a HPDC Cast Aluminium Alloy: Potential and Outcome in a Casting. International Ph.D. Foundry Conference, Brno, June 2007, Czech Republic. More information

Other publications

Zhu, B. (2016). Effect of Si particle modification on the growth and microstructure of anodised aluminium oxide. More information
Bogdanoff, T., Ghassemali, E., Jarfors, A., Seifeddine, S. . The impact of HIP process and heat treatment on the fatigue performance of an Al-Si-Mg alloy component. More information

Licentiate thesis

Seifeddine, S. (2005). On the microstructure formation and mechanical properties of aluminium-silicon cast alloys (Licentiate thesis, Linköping; Jönköping: Linköping University; Jönköping University). More information